Recovery and recrystallization study of an Al-3wt%Mg alloy using a unique combination of quantitative difference-dilatometry and electron backscatter diffraction (EBSD)

Publikation: KonferenzbeitragPosterForschung

Abstract

Special rolling and heating procedures, as well as the formation, migration and annihilation of dislocations are the cause for a well-defined microstructure, which results in the improvement of the properties of work-hardenable metallic materials. Fundamental knowledge of these processes as well as the microstructure is also of utmost importance for the simulation and modelling of large-scale industrial processes, especially in the aluminum industry.

The main subject of this work is to demonstrate a novel approach of recovery and recrystallisation analysis by combining quantitative difference dilatometry with electron backscatter diffraction (EBSD). The first method enables orientation dependent analysis of the irreversible length/volume change during annealing and the latter enables a broad way of microstructural characterization.

For the present study, the commercial aluminum alloy AW5754 was chosen to examine these annealing processes during linear heating after deformation. Contrary to precipitation hardenable aluminum alloys, this type of alloy does not form a second phase during cooling and is therefore not prone to aging effects.

The combined results gained from dilatometry and EBSD can be used for finding key parameters such as characteristic temperatures, activation energies, and especially changes in the dislocation density that are necessary as input parameters for modelling of recovery and recrystallisation processes.
Originalspracheenglisch
PublikationsstatusVeröffentlicht - 2019
VeranstaltungAdvanced Materials Day 2019 - TU Graz, Graz, Österreich
Dauer: 26 Sep 201926 Sep 2019
http://ams.tugraz.at/AMD2019/

Sonstiges

SonstigesAdvanced Materials Day 2019
LandÖsterreich
OrtGraz
Zeitraum26/09/1926/09/19
Internetadresse

Fields of Expertise

  • Advanced Materials Science

Dieses zitieren