Properties of nitrocarburised and oxidised steel surfaces and the correlation with their tribological behaviour under unlubricated sliding conditions

Igor Velkavrh, F. Ausserer, S. Klien, J. Voyer, K. Lingenhöle, F. Kafexhiu, D. Mandrino, B. Podgornik, Johannes Rattenberger, Hartmuth Schröttner, Ferdinand Hofer

Publikation: Beitrag in einer FachzeitschriftArtikel


In the present study, DIN 31CrMoV9 (1.8519) steel samples were initially treated by salt bath- (SNC), gas- (GNC)and plasma-nitrocarburising (PNC) and afterwards oxidised for increased corrosion protection. The thicknessand hardness of the oxide and compound layer as well as the diffusion zone were measured. Surface topographiesand microstructures were analysed with optical microscopy, laser scanning microscopy and scanningelectron microscopy (SEM), while the detailed chemical compositions of the sample surfaces were determinedwith energy-dispersive X-ray spectroscopy (EDX), Auger electron spectroscopy (AES) and X-ray photoelectronspectroscopy (XPS). Tribological tests for characterisation of wear and frictional behaviours of the treatedsamples were performed under unlubricated sliding conditions.Results show that, although different nitrocarburising processes yield very similar hardness profiles andcompound layer thicknesses, their surface morphology and oxide layer properties can be significantly different.On SNC samples, the thickest oxide layers were formed, which had a different chemical composition than thoseformed on GNC and PNC samples. Furthermore, SNC samples provided the highest wear resistance and only onthese samples, the oxide layers were not removed during tribological testing. It is thus possible that a correlationbetween the oxide properties and the favourable tribological behaviour of the SNC samples exists.
Seiten (von - bis)127-141
PublikationsstatusVeröffentlicht - 2018

Dieses zitieren