Modern gas turbines rely more and more on premixed combustion systems. While they produce less emission, they are more prone to combustion instabilities. The combustion noise emitted by turbulent swirl-stabilized flames can be calculated directly if density fluctuations in the flame are known as a function of time and space. Recently it was shown that laser interferometry records density fluctuations in the flame quantitatively. In this work a swirl-stabilized, rotationally-symmetric unconfined methane flame at lean operation conditions and low air mass flow rate was scanned by laser interferometric vibrometry (LIV) in order to calculate the overall sound power emitted by the flame. To validate the outcome calculated from the LIV data, sound power was also measured in a half-hemisphere by microphones, using pressure-pressure-probes. These probes record the total sound power of the combustion noise emitted by the flame. To improve signal to noise ratio for this measurement, a siren was used to generate a reproducible excitation of the flame at 212Hz. Both measurement methods were in good agreement. With the LIV data detailed information about the local density fluctuations in the flame causing the sound emission was obtained. Also a preferred acoustic propagation direction between 40° and 80° to the burner axis in downstream direction was observed. This deviation from a uniform distribution is likely to be caused by temperature gradients in the flame. A discussion of systematic errors inherent to the LIV technique and data reduction concludes this publication.
|Titel||Proceedings ASME Turbo Expo 2017: Turbine Technical Conference and Exposition GT2017|
|Herausgeber (Verlag)||American Society of Mechanical Engineers(ASME)|
|Publikationsstatus||Veröffentlicht - 2017|
Fields of Expertise
- Mobility & Production