Numerical simulation of tensile failure of concrete in direct, flexural, double punch tensile and ring tests

Vahab Sarfarazi, Wulf Schubert

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Abstract

The present study considers the tensile strength of concrete samples in direct, flexural, double punch and ring tests using both of the experimental tests and numerical simulation (particle flow code 2D). It determined that which one of indirect tensile strength is close to direct tensile strength. Initially calibration of PFC was undertaken with respect to the data obtained from Brazilian laboratory tests to ensure the conformity of the simulated numerical models response. Furthermore, validation of the simulated models in four introduced tests was also cross checked with the results from experimental tests. By using numerical testing, the failure process was visually observed and failure patterns were watched to be reasonable in accordance with experimental results. Discrete element simulations demonstrated that the macro fractures in models are caused by microscopic tensile breakages on large numbers of bonded discs. Tensile strength of concrete in direct test was less than other tests results. Tensile strength resulted from punch test was close to direct test results. So punch test can be a proper test for determination of tensile strength of concrete in absence of direct test. Other advantages shown by punch tests are: (1) the punch test need less sample size compared with other tests, (2) less material is need for sample preparation, (3) sample preparation is easy and (4) the use of a simple conventional compression press controlled by displacement compared with complicate device in other tests.

Originalspracheenglisch
Seiten (von - bis)176-183
Seitenumfang8
FachzeitschriftPeriodica Polytechnica / Civil Engineering
Jahrgang61
Ausgabenummer2
DOIs
PublikationsstatusVeröffentlicht - 2017

Fingerprint

Tensile strength
Concretes
Computer simulation
simulation
tensile strength
Macros
test
Numerical models
sample preparation
Calibration
Testing
breakage
compression
calibration

Schlagwörter

    ASJC Scopus subject areas

    • !!Civil and Structural Engineering
    • !!Geotechnical Engineering and Engineering Geology

    Dies zitieren

    Numerical simulation of tensile failure of concrete in direct, flexural, double punch tensile and ring tests. / Sarfarazi, Vahab; Schubert, Wulf.

    in: Periodica Polytechnica / Civil Engineering, Jahrgang 61, Nr. 2, 2017, S. 176-183.

    Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

    @article{756d73af71234551a2864c1de7cd4f51,
    title = "Numerical simulation of tensile failure of concrete in direct, flexural, double punch tensile and ring tests",
    abstract = "The present study considers the tensile strength of concrete samples in direct, flexural, double punch and ring tests using both of the experimental tests and numerical simulation (particle flow code 2D). It determined that which one of indirect tensile strength is close to direct tensile strength. Initially calibration of PFC was undertaken with respect to the data obtained from Brazilian laboratory tests to ensure the conformity of the simulated numerical models response. Furthermore, validation of the simulated models in four introduced tests was also cross checked with the results from experimental tests. By using numerical testing, the failure process was visually observed and failure patterns were watched to be reasonable in accordance with experimental results. Discrete element simulations demonstrated that the macro fractures in models are caused by microscopic tensile breakages on large numbers of bonded discs. Tensile strength of concrete in direct test was less than other tests results. Tensile strength resulted from punch test was close to direct test results. So punch test can be a proper test for determination of tensile strength of concrete in absence of direct test. Other advantages shown by punch tests are: (1) the punch test need less sample size compared with other tests, (2) less material is need for sample preparation, (3) sample preparation is easy and (4) the use of a simple conventional compression press controlled by displacement compared with complicate device in other tests.",
    keywords = "Direct test, Double punch tensile test and ring test, Flexural test, Tensile strength",
    author = "Vahab Sarfarazi and Wulf Schubert",
    year = "2017",
    doi = "10.3311/PPci.9028",
    language = "English",
    volume = "61",
    pages = "176--183",
    journal = "Periodica Polytechnica / Civil Engineering",
    issn = "0553-6626",
    publisher = "Budapest University of Technology and Economics",
    number = "2",

    }

    TY - JOUR

    T1 - Numerical simulation of tensile failure of concrete in direct, flexural, double punch tensile and ring tests

    AU - Sarfarazi, Vahab

    AU - Schubert, Wulf

    PY - 2017

    Y1 - 2017

    N2 - The present study considers the tensile strength of concrete samples in direct, flexural, double punch and ring tests using both of the experimental tests and numerical simulation (particle flow code 2D). It determined that which one of indirect tensile strength is close to direct tensile strength. Initially calibration of PFC was undertaken with respect to the data obtained from Brazilian laboratory tests to ensure the conformity of the simulated numerical models response. Furthermore, validation of the simulated models in four introduced tests was also cross checked with the results from experimental tests. By using numerical testing, the failure process was visually observed and failure patterns were watched to be reasonable in accordance with experimental results. Discrete element simulations demonstrated that the macro fractures in models are caused by microscopic tensile breakages on large numbers of bonded discs. Tensile strength of concrete in direct test was less than other tests results. Tensile strength resulted from punch test was close to direct test results. So punch test can be a proper test for determination of tensile strength of concrete in absence of direct test. Other advantages shown by punch tests are: (1) the punch test need less sample size compared with other tests, (2) less material is need for sample preparation, (3) sample preparation is easy and (4) the use of a simple conventional compression press controlled by displacement compared with complicate device in other tests.

    AB - The present study considers the tensile strength of concrete samples in direct, flexural, double punch and ring tests using both of the experimental tests and numerical simulation (particle flow code 2D). It determined that which one of indirect tensile strength is close to direct tensile strength. Initially calibration of PFC was undertaken with respect to the data obtained from Brazilian laboratory tests to ensure the conformity of the simulated numerical models response. Furthermore, validation of the simulated models in four introduced tests was also cross checked with the results from experimental tests. By using numerical testing, the failure process was visually observed and failure patterns were watched to be reasonable in accordance with experimental results. Discrete element simulations demonstrated that the macro fractures in models are caused by microscopic tensile breakages on large numbers of bonded discs. Tensile strength of concrete in direct test was less than other tests results. Tensile strength resulted from punch test was close to direct test results. So punch test can be a proper test for determination of tensile strength of concrete in absence of direct test. Other advantages shown by punch tests are: (1) the punch test need less sample size compared with other tests, (2) less material is need for sample preparation, (3) sample preparation is easy and (4) the use of a simple conventional compression press controlled by displacement compared with complicate device in other tests.

    KW - Direct test

    KW - Double punch tensile test and ring test

    KW - Flexural test

    KW - Tensile strength

    UR - http://www.scopus.com/inward/record.url?scp=85016223434&partnerID=8YFLogxK

    U2 - 10.3311/PPci.9028

    DO - 10.3311/PPci.9028

    M3 - Article

    VL - 61

    SP - 176

    EP - 183

    JO - Periodica Polytechnica / Civil Engineering

    JF - Periodica Polytechnica / Civil Engineering

    SN - 0553-6626

    IS - 2

    ER -