Modelling and simulation of diffusion driven pore formation in martensitic steels during creep

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Abstract

Abstract

A model has been developed to describe the nucleation and growth of creep pores in crystalline material under service conditions. The nucleation model is based on Becker-Döring (BD) nucleation theory using Helmholtz free energy, while for the growth of pores, a vacancy flux model towards nucleated or existing pores is utilized. The whole model is able to describe nucleation and growth rates of pores in the matrix (homogeneous nucleation), at grain boundaries, at triple and at quadruple grain boundary points as well as at particles/inclusions. Nucleation and growth rates of pores in creep process are considered to be a function of external and internal stress due to the residual stresses, working temperature, local microstructure (nucleation and growth of particles), nucleation sites, interfacial energy of grain boundaries and phase boundary energies, diffusion rates in different paths, and pore geometry. Interrupted creep tests are performed for 9Cr-1Mo martensitic (ASME Gr.91) steels under 66 MPa uniaxial creep loading at 650 °C to track the pore evolution after 0, 2189, 4009, 5272 and 8030 h. The model results are then compared to experimental findings in terms of mean pore size, and volume fraction. The model has good prediction and description power of the physical phenomena.
Spracheenglisch
Seiten466-477
Seitenumfang12
FachzeitschriftMaterials science and engineering / A
Jahrgang712
DOIs
StatusVeröffentlicht - 2018

Fingerprint

Martensitic steel
Creep
Nucleation
nucleation
steels
porosity
simulation
Grain boundaries
grain boundaries
residual stress
Residual stresses
creep tests
interfacial energy
Steel
Phase boundaries
Interfacial energy
Free energy
Pore size
Vacancies
Volume fraction

Schlagwörter

    ASJC Scopus subject areas

    • !!Materials Science(all)

    Fields of Expertise

    • Advanced Materials Science

    Dies zitieren

    Modelling and simulation of diffusion driven pore formation in martensitic steels during creep. / Ahmadi, Mohammad Reza; Sonderegger, Bernhard; Yadav, Surya Deo; Poletti, Maria Cecilia.

    in: Materials science and engineering / A, Jahrgang 712, 2018, S. 466-477.

    Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

    @article{0dd4255f6a9648ba91541e39477b9029,
    title = "Modelling and simulation of diffusion driven pore formation in martensitic steels during creep",
    abstract = "AbstractA model has been developed to describe the nucleation and growth of creep pores in crystalline material under service conditions. The nucleation model is based on Becker-D{\"o}ring (BD) nucleation theory using Helmholtz free energy, while for the growth of pores, a vacancy flux model towards nucleated or existing pores is utilized. The whole model is able to describe nucleation and growth rates of pores in the matrix (homogeneous nucleation), at grain boundaries, at triple and at quadruple grain boundary points as well as at particles/inclusions. Nucleation and growth rates of pores in creep process are considered to be a function of external and internal stress due to the residual stresses, working temperature, local microstructure (nucleation and growth of particles), nucleation sites, interfacial energy of grain boundaries and phase boundary energies, diffusion rates in different paths, and pore geometry. Interrupted creep tests are performed for 9Cr-1Mo martensitic (ASME Gr.91) steels under 66 MPa uniaxial creep loading at 650 °C to track the pore evolution after 0, 2189, 4009, 5272 and 8030 h. The model results are then compared to experimental findings in terms of mean pore size, and volume fraction. The model has good prediction and description power of the physical phenomena.",
    keywords = "Modelling and simulation Creep cavitation Nucleation and growth of pores",
    author = "Ahmadi, {Mohammad Reza} and Bernhard Sonderegger and Yadav, {Surya Deo} and Poletti, {Maria Cecilia}",
    year = "2018",
    doi = "10.1016/j.msea.2017.12.010",
    language = "English",
    volume = "712",
    pages = "466--477",
    journal = "Materials science and engineering / A",
    issn = "0921-5093",
    publisher = "Elsevier B.V.",

    }

    TY - JOUR

    T1 - Modelling and simulation of diffusion driven pore formation in martensitic steels during creep

    AU - Ahmadi, Mohammad Reza

    AU - Sonderegger, Bernhard

    AU - Yadav, Surya Deo

    AU - Poletti, Maria Cecilia

    PY - 2018

    Y1 - 2018

    N2 - AbstractA model has been developed to describe the nucleation and growth of creep pores in crystalline material under service conditions. The nucleation model is based on Becker-Döring (BD) nucleation theory using Helmholtz free energy, while for the growth of pores, a vacancy flux model towards nucleated or existing pores is utilized. The whole model is able to describe nucleation and growth rates of pores in the matrix (homogeneous nucleation), at grain boundaries, at triple and at quadruple grain boundary points as well as at particles/inclusions. Nucleation and growth rates of pores in creep process are considered to be a function of external and internal stress due to the residual stresses, working temperature, local microstructure (nucleation and growth of particles), nucleation sites, interfacial energy of grain boundaries and phase boundary energies, diffusion rates in different paths, and pore geometry. Interrupted creep tests are performed for 9Cr-1Mo martensitic (ASME Gr.91) steels under 66 MPa uniaxial creep loading at 650 °C to track the pore evolution after 0, 2189, 4009, 5272 and 8030 h. The model results are then compared to experimental findings in terms of mean pore size, and volume fraction. The model has good prediction and description power of the physical phenomena.

    AB - AbstractA model has been developed to describe the nucleation and growth of creep pores in crystalline material under service conditions. The nucleation model is based on Becker-Döring (BD) nucleation theory using Helmholtz free energy, while for the growth of pores, a vacancy flux model towards nucleated or existing pores is utilized. The whole model is able to describe nucleation and growth rates of pores in the matrix (homogeneous nucleation), at grain boundaries, at triple and at quadruple grain boundary points as well as at particles/inclusions. Nucleation and growth rates of pores in creep process are considered to be a function of external and internal stress due to the residual stresses, working temperature, local microstructure (nucleation and growth of particles), nucleation sites, interfacial energy of grain boundaries and phase boundary energies, diffusion rates in different paths, and pore geometry. Interrupted creep tests are performed for 9Cr-1Mo martensitic (ASME Gr.91) steels under 66 MPa uniaxial creep loading at 650 °C to track the pore evolution after 0, 2189, 4009, 5272 and 8030 h. The model results are then compared to experimental findings in terms of mean pore size, and volume fraction. The model has good prediction and description power of the physical phenomena.

    KW - Modelling and simulation Creep cavitation Nucleation and growth of pores

    U2 - 10.1016/j.msea.2017.12.010

    DO - 10.1016/j.msea.2017.12.010

    M3 - Article

    VL - 712

    SP - 466

    EP - 477

    JO - Materials science and engineering / A

    T2 - Materials science and engineering / A

    JF - Materials science and engineering / A

    SN - 0921-5093

    ER -