Manipulating Iron Filament with Permanent Magnets for FDM Printing for X-Band

Jan Köhler; Wolfgang Bösch; Erich Leitgeb; Reinhard Teschl; David Johannes Pommerenke

doi:10.1109/CoBCom49975.2020.9174185

Manipulating Iron Filament with Permanent Magnets for FDM Printing for X-Band

Titel in Übersetzung: Manipulierung von Eisenfilament mittels Permanentmagnete in FDM-3D-Druck innerhalb des X-Bands

Jan Köhler, Wolfgang Bösch^*, Erich Leitgeb^*, Reinhard Teschl^*, David Johannes Pommerenke^*

^*Korrespondierende/r Autor/-in für diese Arbeit

Publikation: Beitrag in Buch/Bericht/Konferenzband › Beitrag in einem Konferenzband › Begutachtung

Abstract

This paper presents a novel technique for 3D printing that uses an external magnetic field to direct iron dust mixed into FDM filament. The mobility of the particles during the printing process is exploited to provoke an alignment by means of a static magnetic field. This method offers a completely new possibility to design passive high-frequency components. With very good agreement to the theory a method has been developed, manufactured and was measured within the X-Band.

Titel in Übersetzung	Manipulierung von Eisenfilament mittels Permanentmagnete in FDM-3D-Druck innerhalb des X-Bands
Originalsprache	englisch
Titel	CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings
Seiten	1-8
Seitenumfang	8
ISBN (elektronisch)	978-1-7281-7492-1
DOIs	https://doi.org/10.1109/CoBCom49975.2020.9174185
Publikationsstatus	Veröffentlicht - Juli 2020
Veranstaltung	3rd International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications: CoBCom 2020 - TU Graz, Virtuell, Graz, Österreich Dauer: 7 Juli 2020 → 10 Juli 2020 https://www.cobcom.tugraz.at/

Publikationsreihe

Name	CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings

Konferenz

Konferenz	3rd International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications
Kurztitel	CoBCom 2020
Land/Gebiet	Österreich
Ort	Virtuell, Graz
Zeitraum	7/07/20 → 10/07/20
Internetadresse	https://www.cobcom.tugraz.at/

Schlagwörter

3D-Druck
metamaterial
composite
Magnete
Eisen

ASJC Scopus subject areas

Instrumentierung
Hardware und Architektur
Computernetzwerke und -kommunikation
Medientechnik

Fields of Expertise

Information, Communication & Computing
Advanced Materials Science

Zugriff auf Dokument

10.1109/CoBCom49975.2020.9174185

Andere Dateien und Links

http://www.scopus.com/inward/record.url?scp=85092288366&partnerID=8YFLogxK

FWF - WISDOM - Aktive und passive integrierte Antennen für THz Kommunikationssysteme
Bösch, W., Gadringer, M. E. & Köhler, J.
1/01/17 → 31/12/19
Projekt: Forschungsprojekt

Dieses zitieren

Köhler, J., Bösch, W., Leitgeb, E., Teschl, R., & Pommerenke, D. J. (2020). Manipulating Iron Filament with Permanent Magnets for FDM Printing for X-Band. in CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings (S. 1-8). Artikel 9174185 (CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings). https://doi.org/10.1109/CoBCom49975.2020.9174185

Manipulating Iron Filament with Permanent Magnets for FDM Printing for X-Band. / Köhler, Jan; Bösch, Wolfgang ; Leitgeb, Erich et al.
CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings. 2020. S. 1-8 9174185 (CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings).

Publikation: Beitrag in Buch/Bericht/Konferenzband › Beitrag in einem Konferenzband › Begutachtung

Köhler, J, Bösch, W , Leitgeb, E , Teschl, R & Pommerenke, DJ 2020, Manipulating Iron Filament with Permanent Magnets for FDM Printing for X-Band. in CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings., 9174185, CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings, S. 1-8, 3rd International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications, Virtuell, Graz, Österreich, 7/07/20. https://doi.org/10.1109/CoBCom49975.2020.9174185

Köhler J, Bösch W , Leitgeb E , Teschl R , Pommerenke DJ. Manipulating Iron Filament with Permanent Magnets for FDM Printing for X-Band. in CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings. 2020. S. 1-8. 9174185. (CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings). doi: 10.1109/CoBCom49975.2020.9174185

Köhler, Jan ; Bösch, Wolfgang ; Leitgeb, Erich et al. / Manipulating Iron Filament with Permanent Magnets for FDM Printing for X-Band. CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings. 2020. S. 1-8 (CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings).

@inproceedings{a50185cf975b4e9d8d05659995985147,

title = "Manipulating Iron Filament with Permanent Magnets for FDM Printing for X-Band",

abstract = "This paper presents a novel technique for 3D printing that uses an external magnetic field to direct iron dust mixed into FDM filament. The mobility of the particles during the printing process is exploited to provoke an alignment by means of a static magnetic field. This method offers a completely new possibility to design passive high-frequency components. With very good agreement to the theory a method has been developed, manufactured and was measured within the X-Band.",

keywords = "3D-Druck, metamaterial, composite, Magnete, Eisen, 3d print, metamaterial, composite, maniplation, Iron, iron filament, high frequency, magnets, passive components, Fused Filament Fabrication, 3D printing, X-Band",

author = "Jan K{\"o}hler and Wolfgang B{\"o}sch and Erich Leitgeb and Reinhard Teschl and Pommerenke, {David Johannes}",

year = "2020",

month = jul,

doi = "10.1109/CoBCom49975.2020.9174185",

language = "English",

series = "CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings",

pages = "1--8",

booktitle = "CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings",

note = "3rd International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications : CoBCom 2020, CoBCom 2020 ; Conference date: 07-07-2020 Through 10-07-2020",

url = "https://www.cobcom.tugraz.at/",

}

TY - GEN

T1 - Manipulating Iron Filament with Permanent Magnets for FDM Printing for X-Band

AU - Köhler, Jan

AU - Bösch, Wolfgang

AU - Leitgeb, Erich

AU - Teschl, Reinhard

AU - Pommerenke, David Johannes

PY - 2020/7

Y1 - 2020/7

N2 - This paper presents a novel technique for 3D printing that uses an external magnetic field to direct iron dust mixed into FDM filament. The mobility of the particles during the printing process is exploited to provoke an alignment by means of a static magnetic field. This method offers a completely new possibility to design passive high-frequency components. With very good agreement to the theory a method has been developed, manufactured and was measured within the X-Band.

AB - This paper presents a novel technique for 3D printing that uses an external magnetic field to direct iron dust mixed into FDM filament. The mobility of the particles during the printing process is exploited to provoke an alignment by means of a static magnetic field. This method offers a completely new possibility to design passive high-frequency components. With very good agreement to the theory a method has been developed, manufactured and was measured within the X-Band.

KW - 3D-Druck

KW - metamaterial

KW - composite

KW - Magnete

KW - Eisen

KW - 3d print

KW - metamaterial

KW - composite

KW - maniplation

KW - Iron

KW - iron filament

KW - high frequency

KW - magnets

KW - passive components

KW - Fused Filament Fabrication

KW - 3D printing

KW - X-Band

UR - http://www.scopus.com/inward/record.url?scp=85092288366&partnerID=8YFLogxK

U2 - 10.1109/CoBCom49975.2020.9174185

DO - 10.1109/CoBCom49975.2020.9174185

M3 - Conference paper

T3 - CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings

SP - 1

EP - 8

BT - CoBCom 2020 - International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications - Proceedings

T2 - 3rd International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications

Y2 - 7 July 2020 through 10 July 2020

ER -

Manipulating Iron Filament with Permanent Magnets for FDM Printing for X-Band

Abstract

Publikationsreihe

Konferenz

Schlagwörter

ASJC Scopus subject areas

Fields of Expertise

Zugriff auf Dokument

Andere Dateien und Links

Fingerprint

Projekte

FWF - WISDOM - Aktive und passive integrierte Antennen für THz Kommunikationssysteme

Dieses zitieren