In situ real-time annealing of ultrathin vertical Fe nanowires grown by focused electron beam induced deposition

Javier Pablo-Navarro, Robert Winkler, Georg Haberfehlner, Cesar Magen, Harald Plank, Jose Maria De Teresa

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Abstract

Focused Electron Beam Induced Deposition is a consolidated technique for the growth of three-dimensional (3D) nanostructures. However, this single-step nanofabrication method requires furtherefforts to optimize simultaneously dimensional and compositional properties, in particular for depositswith a high aspect ratio. More specifically, ferromagnetic 3D nanowires (NWs) with diameters in the sub-50 nm regime and high metallic contents up to 95 at. % attract great interest to improve thefinal per-formance of magnetic nanodevices such as magnetic tips for scanning probe microscopy. In this work, wereport on real-time monitoring during chemical purification and structural crystallization processes ofultra-narrow 3D Fe NWs (<50 nm in diameter achieved) by post-growthin situannealing in a trans-mission electron microscope. NW heating up to 700C in very high vacuum reveals the local increase ofthe metallic content along the entire NW length concomitant with the growth of large Fe single crystalsfrom initially amorphous compounds. A metallic purity of 95 at. % is observed in several regions,dramatically boosting the initial Fe content of 40 at. %. The real-timein situtracking of 3D nanostructuresduring thermal annealing is a key element to design and optimize novel purification processes for thefabrication of customized components to be integrated in spintronic, logic and sensing devices
Originalspracheenglisch
Seiten (von - bis)379-386
FachzeitschriftActa materialia
Jahrgang174
DOIs
PublikationsstatusVeröffentlicht - 2019

ASJC Scopus subject areas

  • !!Materials Science(all)

Fields of Expertise

  • Advanced Materials Science

Treatment code (Nähere Zuordnung)

  • Basic - Fundamental (Grundlagenforschung)

Dies zitieren

In situ real-time annealing of ultrathin vertical Fe nanowires grown by focused electron beam induced deposition. / Pablo-Navarro, Javier; Winkler, Robert; Haberfehlner, Georg; Magen, Cesar; Plank, Harald; De Teresa, Jose Maria.

in: Acta materialia, Jahrgang 174, 2019, S. 379-386.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

@article{718bcb2b3b014cdab73592c882d1c6c6,
title = "In situ real-time annealing of ultrathin vertical Fe nanowires grown by focused electron beam induced deposition",
abstract = "Focused Electron Beam Induced Deposition is a consolidated technique for the growth of three-dimensional (3D) nanostructures. However, this single-step nanofabrication method requires furtherefforts to optimize simultaneously dimensional and compositional properties, in particular for depositswith a high aspect ratio. More specifically, ferromagnetic 3D nanowires (NWs) with diameters in the sub-50 nm regime and high metallic contents up to 95 at. {\%} attract great interest to improve thefinal per-formance of magnetic nanodevices such as magnetic tips for scanning probe microscopy. In this work, wereport on real-time monitoring during chemical purification and structural crystallization processes ofultra-narrow 3D Fe NWs (<50 nm in diameter achieved) by post-growthin situannealing in a trans-mission electron microscope. NW heating up to 700C in very high vacuum reveals the local increase ofthe metallic content along the entire NW length concomitant with the growth of large Fe single crystalsfrom initially amorphous compounds. A metallic purity of 95 at. {\%} is observed in several regions,dramatically boosting the initial Fe content of 40 at. {\%}. The real-timein situtracking of 3D nanostructuresduring thermal annealing is a key element to design and optimize novel purification processes for thefabrication of customized components to be integrated in spintronic, logic and sensing devices",
author = "Javier Pablo-Navarro and Robert Winkler and Georg Haberfehlner and Cesar Magen and Harald Plank and {De Teresa}, {Jose Maria}",
year = "2019",
doi = "10.1016/j.actamat.2019.05.035",
language = "English",
volume = "174",
pages = "379--386",
journal = "Acta materialia",
issn = "1359-6454",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - In situ real-time annealing of ultrathin vertical Fe nanowires grown by focused electron beam induced deposition

AU - Pablo-Navarro, Javier

AU - Winkler, Robert

AU - Haberfehlner, Georg

AU - Magen, Cesar

AU - Plank, Harald

AU - De Teresa, Jose Maria

PY - 2019

Y1 - 2019

N2 - Focused Electron Beam Induced Deposition is a consolidated technique for the growth of three-dimensional (3D) nanostructures. However, this single-step nanofabrication method requires furtherefforts to optimize simultaneously dimensional and compositional properties, in particular for depositswith a high aspect ratio. More specifically, ferromagnetic 3D nanowires (NWs) with diameters in the sub-50 nm regime and high metallic contents up to 95 at. % attract great interest to improve thefinal per-formance of magnetic nanodevices such as magnetic tips for scanning probe microscopy. In this work, wereport on real-time monitoring during chemical purification and structural crystallization processes ofultra-narrow 3D Fe NWs (<50 nm in diameter achieved) by post-growthin situannealing in a trans-mission electron microscope. NW heating up to 700C in very high vacuum reveals the local increase ofthe metallic content along the entire NW length concomitant with the growth of large Fe single crystalsfrom initially amorphous compounds. A metallic purity of 95 at. % is observed in several regions,dramatically boosting the initial Fe content of 40 at. %. The real-timein situtracking of 3D nanostructuresduring thermal annealing is a key element to design and optimize novel purification processes for thefabrication of customized components to be integrated in spintronic, logic and sensing devices

AB - Focused Electron Beam Induced Deposition is a consolidated technique for the growth of three-dimensional (3D) nanostructures. However, this single-step nanofabrication method requires furtherefforts to optimize simultaneously dimensional and compositional properties, in particular for depositswith a high aspect ratio. More specifically, ferromagnetic 3D nanowires (NWs) with diameters in the sub-50 nm regime and high metallic contents up to 95 at. % attract great interest to improve thefinal per-formance of magnetic nanodevices such as magnetic tips for scanning probe microscopy. In this work, wereport on real-time monitoring during chemical purification and structural crystallization processes ofultra-narrow 3D Fe NWs (<50 nm in diameter achieved) by post-growthin situannealing in a trans-mission electron microscope. NW heating up to 700C in very high vacuum reveals the local increase ofthe metallic content along the entire NW length concomitant with the growth of large Fe single crystalsfrom initially amorphous compounds. A metallic purity of 95 at. % is observed in several regions,dramatically boosting the initial Fe content of 40 at. %. The real-timein situtracking of 3D nanostructuresduring thermal annealing is a key element to design and optimize novel purification processes for thefabrication of customized components to be integrated in spintronic, logic and sensing devices

U2 - 10.1016/j.actamat.2019.05.035

DO - 10.1016/j.actamat.2019.05.035

M3 - Article

VL - 174

SP - 379

EP - 386

JO - Acta materialia

JF - Acta materialia

SN - 1359-6454

ER -