TY - JOUR
T1 - Hardening of electromechanical properties in piezoceramics using a composite approach
AU - Lalitha, K. V.
AU - Riemer, Lukas M.
AU - Koruza, Jurij
AU - Rödel, Jürgen
N1 - Publisher Copyright:
© 2017 Author(s).
PY - 2017/7/10
Y1 - 2017/7/10
N2 - Piezoelectric applications such as ultrasonic motors, transformers and therapeutic ultrasonics demand high power generation with low losses, which is facilitated by "hard" ferroelectrics. Hardening of piezoelectric properties, characterized by high mechanical quality factor (Qm), is usually achieved by doping with lower valence elements, thereby tailoring the domain wall dynamics. In the present study, we demonstrate a hardening mechanism by developing composites of 0.94(Na1/2Bi1/2)TiO3-0.06BaTiO3 (NBT-6BT) with ZnO inclusions, as an alternative to chemical modifications. A decrease in the saturation polarization and total strain, higher internal bias fields, lower hysteretic losses and a two-fold increase in Qm are observed in comparison to NBT-6BT. The composite with 0.1 mole ratio of ZnO exhibits the highest Qm of 320 with d33 = 125 pC/N and Kp = 0.29. A one-to-one correspondence between the increase in Qm and the decrease in the domain wall mobility is established from the ac field dependence of permittivity, in the framework of the Rayleigh law. A further increase in ZnO content beyond a mole ratio of 0.1 reduces Qm, but retains it at a higher level, as compared to NBT-6BT. The results are explained based on the poling-induced strain incompatibility between the matrix and the hard ZnO phase. This composite approach is therefore considered a generic hardening concept and can be extended to other ferroelectric systems.
AB - Piezoelectric applications such as ultrasonic motors, transformers and therapeutic ultrasonics demand high power generation with low losses, which is facilitated by "hard" ferroelectrics. Hardening of piezoelectric properties, characterized by high mechanical quality factor (Qm), is usually achieved by doping with lower valence elements, thereby tailoring the domain wall dynamics. In the present study, we demonstrate a hardening mechanism by developing composites of 0.94(Na1/2Bi1/2)TiO3-0.06BaTiO3 (NBT-6BT) with ZnO inclusions, as an alternative to chemical modifications. A decrease in the saturation polarization and total strain, higher internal bias fields, lower hysteretic losses and a two-fold increase in Qm are observed in comparison to NBT-6BT. The composite with 0.1 mole ratio of ZnO exhibits the highest Qm of 320 with d33 = 125 pC/N and Kp = 0.29. A one-to-one correspondence between the increase in Qm and the decrease in the domain wall mobility is established from the ac field dependence of permittivity, in the framework of the Rayleigh law. A further increase in ZnO content beyond a mole ratio of 0.1 reduces Qm, but retains it at a higher level, as compared to NBT-6BT. The results are explained based on the poling-induced strain incompatibility between the matrix and the hard ZnO phase. This composite approach is therefore considered a generic hardening concept and can be extended to other ferroelectric systems.
UR - http://www.scopus.com/inward/record.url?scp=85024489426&partnerID=8YFLogxK
U2 - 10.1063/1.4986911
DO - 10.1063/1.4986911
M3 - Article
AN - SCOPUS:85024489426
SN - 0003-6951
VL - 111
JO - Applied Physics Letters
JF - Applied Physics Letters
IS - 2
M1 - 022905
ER -