Fe-analysis of anchor pull out tests using advanced constitutive models

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem Konferenzband

Abstract

The bearing capacity of ground anchors is significantly influenced by the surrounding soil and by the mechan-ical behaviour of the grout in the bonded length. In stiff overconsolidated clays, peak strength and strain sof-tening leads to a non-uniform distribution of the mobilised shear strength. In order to reproduce an in-situ an-chor pull out test, advanced constitutive models are employed in numerical analyses, namely a multilaminate model developed for overconsolidated stiff soils and a constitutive model accounting for strain softening for the grout. The numerical results obtained with the Multilaminate model are compared to the results obtained with the Hardening Soil Small model and to in-situ fibre optics measurements. The Multilaminate soil model was capable of reproduce the softening in the stiff overconsolidated soil and the cracks in the grout could be captured reasonably well. The strain measurements and the load-displacement behaviour were well repro-duced.
Originalspracheenglisch
TitelPROCEEDINGS OF THE 9TH EUROPEAN CONFERENCE ON NUMERICAL METHODS IN GEOTECHNICAL ENGINEERING (NUMGE 2018)
Seiten125-132
Band1
ISBN (elektronisch)9781138331983
PublikationsstatusVeröffentlicht - 2018
VeranstaltungNUMERICAL METHODS IN GEOTECHNICAL ENGINEERING IX - Porto, Porto, Portugal
Dauer: 25 Jun 201827 Jun 2018
Konferenznummer: IX

Konferenz

KonferenzNUMERICAL METHODS IN GEOTECHNICAL ENGINEERING IX
KurztitelNUMGE
LandPortugal
OrtPorto
Zeitraum25/06/1827/06/18

Fingerprint

Untersuchen Sie die Forschungsthemen von „Fe-analysis of anchor pull out tests using advanced constitutive models“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren