Factorial design of experiments for polymer-metal joining

Lucian Attila Blaga, Gonçalo P. Cipriano, Arnaldo R. Gonzalez, Sergio T. Amancio-Filho

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/BerichtForschungBegutachtung

Abstract

This chapter presents the basics of design of experiments (DoE) and emphasizes on its utility for the development, deeper understanding, and optimization of metal-polymer joining technologies. Factorial designs are the basis of the most commonly used experimental designs. Recently, DoE and analysis of variance (ANOVA) have been increasingly applied in welding and joining as a tool for weld or joint optimization. The use of a DoE allows cause-effect correlations to be established between the process input factors and the process responses. Although a limited number of DoE and ANOVA studies on similar joints and welds were published, very few studies on metal-polymer joints have been published. The chapter also presents case studies presented that are examples from research works within the Advanced Polymer-Metal Hybrid Structures Group at the Helmholtz-Zentrum Geesthacht, Germany, and its international cooperation projects.

Originalspracheenglisch
TitelJoining of Polymer-Metal Hybrid Structures
UntertitelPrinciples and Applications
Herausgeber (Verlag)Wiley
Seiten337-364
Seitenumfang28
ISBN (elektronisch)9781119429807
ISBN (Print)9781118177631
DOIs
PublikationsstatusVeröffentlicht - 1 Jan 2018

Fingerprint

Joining
Design of experiments
Polymers
Metals
Analysis of variance (ANOVA)
Welds
International cooperation
Welding

Schlagwörter

    ASJC Scopus subject areas

    • !!Engineering(all)
    • !!Chemical Engineering(all)

    Dies zitieren

    Blaga, L. A., Cipriano, G. P., Gonzalez, A. R., & Amancio-Filho, S. T. (2018). Factorial design of experiments for polymer-metal joining. in Joining of Polymer-Metal Hybrid Structures: Principles and Applications (S. 337-364). Wiley. https://doi.org/10.1002/9781119429807.ch12

    Factorial design of experiments for polymer-metal joining. / Blaga, Lucian Attila; Cipriano, Gonçalo P.; Gonzalez, Arnaldo R.; Amancio-Filho, Sergio T.

    Joining of Polymer-Metal Hybrid Structures: Principles and Applications. Wiley, 2018. S. 337-364.

    Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/BerichtForschungBegutachtung

    Blaga, LA, Cipriano, GP, Gonzalez, AR & Amancio-Filho, ST 2018, Factorial design of experiments for polymer-metal joining. in Joining of Polymer-Metal Hybrid Structures: Principles and Applications. Wiley, S. 337-364. https://doi.org/10.1002/9781119429807.ch12
    Blaga LA, Cipriano GP, Gonzalez AR, Amancio-Filho ST. Factorial design of experiments for polymer-metal joining. in Joining of Polymer-Metal Hybrid Structures: Principles and Applications. Wiley. 2018. S. 337-364 https://doi.org/10.1002/9781119429807.ch12
    Blaga, Lucian Attila ; Cipriano, Gonçalo P. ; Gonzalez, Arnaldo R. ; Amancio-Filho, Sergio T. / Factorial design of experiments for polymer-metal joining. Joining of Polymer-Metal Hybrid Structures: Principles and Applications. Wiley, 2018. S. 337-364
    @inbook{58989cb8dda44b6ca27ddcf1c4b18c09,
    title = "Factorial design of experiments for polymer-metal joining",
    abstract = "This chapter presents the basics of design of experiments (DoE) and emphasizes on its utility for the development, deeper understanding, and optimization of metal-polymer joining technologies. Factorial designs are the basis of the most commonly used experimental designs. Recently, DoE and analysis of variance (ANOVA) have been increasingly applied in welding and joining as a tool for weld or joint optimization. The use of a DoE allows cause-effect correlations to be established between the process input factors and the process responses. Although a limited number of DoE and ANOVA studies on similar joints and welds were published, very few studies on metal-polymer joints have been published. The chapter also presents case studies presented that are examples from research works within the Advanced Polymer-Metal Hybrid Structures Group at the Helmholtz-Zentrum Geesthacht, Germany, and its international cooperation projects.",
    keywords = "Analysis of variance, Cause-effect correlations, Design of experiments, Factorial designs, International cooperation projects, Metal-polymer joining technologies",
    author = "Blaga, {Lucian Attila} and Cipriano, {Gon{\cc}alo P.} and Gonzalez, {Arnaldo R.} and Amancio-Filho, {Sergio T.}",
    year = "2018",
    month = "1",
    day = "1",
    doi = "10.1002/9781119429807.ch12",
    language = "English",
    isbn = "9781118177631",
    pages = "337--364",
    booktitle = "Joining of Polymer-Metal Hybrid Structures",
    publisher = "Wiley",

    }

    TY - CHAP

    T1 - Factorial design of experiments for polymer-metal joining

    AU - Blaga, Lucian Attila

    AU - Cipriano, Gonçalo P.

    AU - Gonzalez, Arnaldo R.

    AU - Amancio-Filho, Sergio T.

    PY - 2018/1/1

    Y1 - 2018/1/1

    N2 - This chapter presents the basics of design of experiments (DoE) and emphasizes on its utility for the development, deeper understanding, and optimization of metal-polymer joining technologies. Factorial designs are the basis of the most commonly used experimental designs. Recently, DoE and analysis of variance (ANOVA) have been increasingly applied in welding and joining as a tool for weld or joint optimization. The use of a DoE allows cause-effect correlations to be established between the process input factors and the process responses. Although a limited number of DoE and ANOVA studies on similar joints and welds were published, very few studies on metal-polymer joints have been published. The chapter also presents case studies presented that are examples from research works within the Advanced Polymer-Metal Hybrid Structures Group at the Helmholtz-Zentrum Geesthacht, Germany, and its international cooperation projects.

    AB - This chapter presents the basics of design of experiments (DoE) and emphasizes on its utility for the development, deeper understanding, and optimization of metal-polymer joining technologies. Factorial designs are the basis of the most commonly used experimental designs. Recently, DoE and analysis of variance (ANOVA) have been increasingly applied in welding and joining as a tool for weld or joint optimization. The use of a DoE allows cause-effect correlations to be established between the process input factors and the process responses. Although a limited number of DoE and ANOVA studies on similar joints and welds were published, very few studies on metal-polymer joints have been published. The chapter also presents case studies presented that are examples from research works within the Advanced Polymer-Metal Hybrid Structures Group at the Helmholtz-Zentrum Geesthacht, Germany, and its international cooperation projects.

    KW - Analysis of variance

    KW - Cause-effect correlations

    KW - Design of experiments

    KW - Factorial designs

    KW - International cooperation projects

    KW - Metal-polymer joining technologies

    UR - http://www.scopus.com/inward/record.url?scp=85050218249&partnerID=8YFLogxK

    U2 - 10.1002/9781119429807.ch12

    DO - 10.1002/9781119429807.ch12

    M3 - Chapter

    SN - 9781118177631

    SP - 337

    EP - 364

    BT - Joining of Polymer-Metal Hybrid Structures

    PB - Wiley

    ER -