Experimental determination of specific power losses and magnetostriction of electrical steel coils

Thomas Tanzer, Helmut Pregartner, Annette Mütze, Klaus Krischan

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandForschungBegutachtung

Abstract

A method for measuring the specific losses and magnetostriction of grain-oriented electrical steel coils up to six tons is presented. Since transformer core manufacturers are mainly supplied with entire steel coils, a fast incoming goods inspection is desirable. The proposed method identifies the specific losses at certain flux densities of the entire steel coils. In addition, the magnetostriction of the coiled material is measured. With the magnetostriction the main property for transformer no-load noise can be classified. The structure and setup of the developed coil measurement system (CMS) are shown. The measurement technique is explained and its requirements are identified. Initial results of specific power losses and magnetostriction of electrical steel coils as well as the reproducibility of the results are highlighted.
Originalspracheenglisch
Titel2016 XXII International Conference on Electrical Machines (ICEM)
Seiten2230-2236
ISBN (elektronisch)978-1-5090-2538-1
DOIs
PublikationsstatusVeröffentlicht - 2016
VeranstaltungXXIIth International Conference on Electrical Machines (ICEM'2016) - Lausanne, Lausanne, Schweiz
Dauer: 4 Sep 20167 Sep 2016
http://www.icem.cc/2016/

Konferenz

KonferenzXXIIth International Conference on Electrical Machines (ICEM'2016)
KurztitelICEM'2016
LandSchweiz
OrtLausanne
Zeitraum4/09/167/09/16
Internetadresse

Fingerprint

Magnetostriction
Steel
Inspection
Fluxes

Schlagwörter

    ASJC Scopus subject areas

    • !!Electrical and Electronic Engineering

    Dies zitieren

    Tanzer, T., Pregartner, H., Mütze, A., & Krischan, K. (2016). Experimental determination of specific power losses and magnetostriction of electrical steel coils. in 2016 XXII International Conference on Electrical Machines (ICEM) (S. 2230-2236) https://doi.org/10.1109/ICELMACH.2016.7732832

    Experimental determination of specific power losses and magnetostriction of electrical steel coils. / Tanzer, Thomas; Pregartner, Helmut; Mütze, Annette; Krischan, Klaus.

    2016 XXII International Conference on Electrical Machines (ICEM). 2016. S. 2230-2236.

    Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandForschungBegutachtung

    Tanzer, T, Pregartner, H, Mütze, A & Krischan, K 2016, Experimental determination of specific power losses and magnetostriction of electrical steel coils. in 2016 XXII International Conference on Electrical Machines (ICEM). S. 2230-2236, XXIIth International Conference on Electrical Machines (ICEM'2016), Lausanne, Schweiz, 4/09/16. https://doi.org/10.1109/ICELMACH.2016.7732832
    Tanzer T, Pregartner H, Mütze A, Krischan K. Experimental determination of specific power losses and magnetostriction of electrical steel coils. in 2016 XXII International Conference on Electrical Machines (ICEM). 2016. S. 2230-2236 https://doi.org/10.1109/ICELMACH.2016.7732832
    Tanzer, Thomas ; Pregartner, Helmut ; Mütze, Annette ; Krischan, Klaus. / Experimental determination of specific power losses and magnetostriction of electrical steel coils. 2016 XXII International Conference on Electrical Machines (ICEM). 2016. S. 2230-2236
    @inproceedings{8eaaa2f6063e453a8d1bfdf8ba0155cb,
    title = "Experimental determination of specific power losses and magnetostriction of electrical steel coils",
    abstract = "A method for measuring the specific losses and magnetostriction of grain-oriented electrical steel coils up to six tons is presented. Since transformer core manufacturers are mainly supplied with entire steel coils, a fast incoming goods inspection is desirable. The proposed method identifies the specific losses at certain flux densities of the entire steel coils. In addition, the magnetostriction of the coiled material is measured. With the magnetostriction the main property for transformer no-load noise can be classified. The structure and setup of the developed coil measurement system (CMS) are shown. The measurement technique is explained and its requirements are identified. Initial results of specific power losses and magnetostriction of electrical steel coils as well as the reproducibility of the results are highlighted.",
    keywords = "steel coil, magnetostriction, measurement systems, power transformers, transformer cores, CMS, coil measurement system, flux density, grain-oriented electrical steel coil magnetostriction, measurement technique, power losses determination, transformer no-load noise, Loss measurement, Power measurement, Voltage measurement, Windings, electrical steel, grain-oriented material, magnetic properties, specific losses",
    author = "Thomas Tanzer and Helmut Pregartner and Annette M{\"u}tze and Klaus Krischan",
    year = "2016",
    doi = "10.1109/ICELMACH.2016.7732832",
    language = "English",
    isbn = "978-1-5090-2539-8",
    pages = "2230--2236",
    booktitle = "2016 XXII International Conference on Electrical Machines (ICEM)",

    }

    TY - GEN

    T1 - Experimental determination of specific power losses and magnetostriction of electrical steel coils

    AU - Tanzer, Thomas

    AU - Pregartner, Helmut

    AU - Mütze, Annette

    AU - Krischan, Klaus

    PY - 2016

    Y1 - 2016

    N2 - A method for measuring the specific losses and magnetostriction of grain-oriented electrical steel coils up to six tons is presented. Since transformer core manufacturers are mainly supplied with entire steel coils, a fast incoming goods inspection is desirable. The proposed method identifies the specific losses at certain flux densities of the entire steel coils. In addition, the magnetostriction of the coiled material is measured. With the magnetostriction the main property for transformer no-load noise can be classified. The structure and setup of the developed coil measurement system (CMS) are shown. The measurement technique is explained and its requirements are identified. Initial results of specific power losses and magnetostriction of electrical steel coils as well as the reproducibility of the results are highlighted.

    AB - A method for measuring the specific losses and magnetostriction of grain-oriented electrical steel coils up to six tons is presented. Since transformer core manufacturers are mainly supplied with entire steel coils, a fast incoming goods inspection is desirable. The proposed method identifies the specific losses at certain flux densities of the entire steel coils. In addition, the magnetostriction of the coiled material is measured. With the magnetostriction the main property for transformer no-load noise can be classified. The structure and setup of the developed coil measurement system (CMS) are shown. The measurement technique is explained and its requirements are identified. Initial results of specific power losses and magnetostriction of electrical steel coils as well as the reproducibility of the results are highlighted.

    KW - steel coil

    KW - magnetostriction

    KW - measurement systems

    KW - power transformers

    KW - transformer cores

    KW - CMS

    KW - coil measurement system

    KW - flux density

    KW - grain-oriented electrical steel coil magnetostriction

    KW - measurement technique

    KW - power losses determination

    KW - transformer no-load noise

    KW - Loss measurement

    KW - Power measurement

    KW - Voltage measurement

    KW - Windings

    KW - electrical steel

    KW - grain-oriented material

    KW - magnetic properties

    KW - specific losses

    U2 - 10.1109/ICELMACH.2016.7732832

    DO - 10.1109/ICELMACH.2016.7732832

    M3 - Conference contribution

    SN - 978-1-5090-2539-8

    SP - 2230

    EP - 2236

    BT - 2016 XXII International Conference on Electrical Machines (ICEM)

    ER -