Control of Biomass Grate Boilers using Internal Model Control

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Abstract

A new model-based control strategy for biomass grate boilers is presented in this paper. Internal model control is used to control four outputs of the plant and to achieve a control structure with fewer control parameters needing to be experimentally tuned. A nonlinear state–space model describing the essential behaviour of the biomass grate boiler is used for controller design. The inverse system dynamics representing the main part of internal model control are designed with the help of this model. In doing so the properties of differentially flat systems are used. Due to a time delayed input, the inverse system is determined only for three input output channels. The stabilization of the inverse system dynamics, however, is a challenging task. A stabilization method with the help of the time delayed input is suggested and a stability analysis is given. The new control strategy has only three parameters to be tuned, representing a major reduction of complexity in comparison to existing model-based approaches. Finally, experimental results of the implemented control strategy on representative biomass grate boiler with a nominal capacity of 180 kW are presented and compared to an existing model-based control strategy based on input output linearization. The experimental evaluation proves that it is possible to operate the biomass boiler in all load ranges with high efficiency and low pollutant emissions.
Originalspracheenglisch
Aufsatznummer104274
Seitenumfang10
FachzeitschriftControl engineering practice
Jahrgang96
DOIs
PublikationsstatusVeröffentlicht - 2020

Fingerprint

Internal Model Control
Biomass
Inverse System
Boilers
Control Strategy
Inverse Dynamics
Model-based Control
System Dynamics
Output
Stabilization
State-space Model
Pollutants
Experimental Evaluation
Controller Design
Control Parameter
Linearization
Categorical or nominal
High Efficiency
Nonlinear Model
Stability Analysis

Dies zitieren

Control of Biomass Grate Boilers using Internal Model Control. / Schörghuber, Christoph; Gölles, Markus; Reichhartinger, Markus; Horn, Martin.

in: Control engineering practice, Jahrgang 96, 104274, 2020.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

@article{e3321e5e97ae4e6da0e688f1894b2d38,
title = "Control of Biomass Grate Boilers using Internal Model Control",
abstract = "A new model-based control strategy for biomass grate boilers is presented in this paper. Internal model control is used to control four outputs of the plant and to achieve a control structure with fewer control parameters needing to be experimentally tuned. A nonlinear state–space model describing the essential behaviour of the biomass grate boiler is used for controller design. The inverse system dynamics representing the main part of internal model control are designed with the help of this model. In doing so the properties of differentially flat systems are used. Due to a time delayed input, the inverse system is determined only for three input output channels. The stabilization of the inverse system dynamics, however, is a challenging task. A stabilization method with the help of the time delayed input is suggested and a stability analysis is given. The new control strategy has only three parameters to be tuned, representing a major reduction of complexity in comparison to existing model-based approaches. Finally, experimental results of the implemented control strategy on representative biomass grate boiler with a nominal capacity of 180 kW are presented and compared to an existing model-based control strategy based on input output linearization. The experimental evaluation proves that it is possible to operate the biomass boiler in all load ranges with high efficiency and low pollutant emissions.",
author = "Christoph Sch{\"o}rghuber and Markus G{\"o}lles and Markus Reichhartinger and Martin Horn",
year = "2020",
doi = "10.1016/j.conengprac.2019.104274",
language = "English",
volume = "96",
journal = "Control engineering practice",
issn = "0967-0661",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Control of Biomass Grate Boilers using Internal Model Control

AU - Schörghuber, Christoph

AU - Gölles, Markus

AU - Reichhartinger, Markus

AU - Horn, Martin

PY - 2020

Y1 - 2020

N2 - A new model-based control strategy for biomass grate boilers is presented in this paper. Internal model control is used to control four outputs of the plant and to achieve a control structure with fewer control parameters needing to be experimentally tuned. A nonlinear state–space model describing the essential behaviour of the biomass grate boiler is used for controller design. The inverse system dynamics representing the main part of internal model control are designed with the help of this model. In doing so the properties of differentially flat systems are used. Due to a time delayed input, the inverse system is determined only for three input output channels. The stabilization of the inverse system dynamics, however, is a challenging task. A stabilization method with the help of the time delayed input is suggested and a stability analysis is given. The new control strategy has only three parameters to be tuned, representing a major reduction of complexity in comparison to existing model-based approaches. Finally, experimental results of the implemented control strategy on representative biomass grate boiler with a nominal capacity of 180 kW are presented and compared to an existing model-based control strategy based on input output linearization. The experimental evaluation proves that it is possible to operate the biomass boiler in all load ranges with high efficiency and low pollutant emissions.

AB - A new model-based control strategy for biomass grate boilers is presented in this paper. Internal model control is used to control four outputs of the plant and to achieve a control structure with fewer control parameters needing to be experimentally tuned. A nonlinear state–space model describing the essential behaviour of the biomass grate boiler is used for controller design. The inverse system dynamics representing the main part of internal model control are designed with the help of this model. In doing so the properties of differentially flat systems are used. Due to a time delayed input, the inverse system is determined only for three input output channels. The stabilization of the inverse system dynamics, however, is a challenging task. A stabilization method with the help of the time delayed input is suggested and a stability analysis is given. The new control strategy has only three parameters to be tuned, representing a major reduction of complexity in comparison to existing model-based approaches. Finally, experimental results of the implemented control strategy on representative biomass grate boiler with a nominal capacity of 180 kW are presented and compared to an existing model-based control strategy based on input output linearization. The experimental evaluation proves that it is possible to operate the biomass boiler in all load ranges with high efficiency and low pollutant emissions.

U2 - 10.1016/j.conengprac.2019.104274

DO - 10.1016/j.conengprac.2019.104274

M3 - Article

VL - 96

JO - Control engineering practice

JF - Control engineering practice

SN - 0967-0661

M1 - 104274

ER -