Control design and application of a new ESD measurement system for influence analysis of different factors on parameters

Fangming Ruan; Chao Zhang; Wenjun Xiao; Maochao Tian; David Pommerenke; Ming Su; Qijun Zhi; Heng Wang; Yi Wang; Xiaohong Yang; Junhua Zhang; Sheng Li

doi:10.1109/ISEMC.2016.7571727

Control design and application of a new ESD measurement system for influence analysis of different factors on parameters

Fangming Ruan^*, Chao Zhang, Wenjun Xiao, Maochao Tian, David Pommerenke, Ming Su, Qijun Zhi, Heng Wang, Yi Wang, Xiaohong Yang, Junhua Zhang, Sheng Li

^*Korrespondierende/r Autor/in für diese Arbeit

Publikation: Beitrag in Buch/Bericht/Konferenzband › Beitrag in einem Konferenzband

Abstract

A new measurement system has been created for investigation of non-contact electrostatic discharge(ESD). An automotive control section of gas pressure was designed to meet the requirement of the new invented ESD measurement system. Experiment result with the new ESD measurement system shown that gas pressure and relative humidity have distinctive effect on peak value, rise/fall time of discharge current. Some possible mechanism was discussed for the influence of gas pressure and relative humidity. On-off state of solenoid valve was decided once received feedback signal from sensor through applying PID algorithm to output PWM impulse. Desired stable value can be obtained and improved performance of the new ESD measurement system.

Originalsprache	englisch
Titel	2016 IEEE International Symposium on Electromagnetic Compatibility, EMC 2016
Herausgeber (Verlag)	Institute of Electrical and Electronics Engineers
Seiten	663-666
Seitenumfang	4
ISBN (elektronisch)	9781509014415
DOIs	https://doi.org/10.1109/ISEMC.2016.7571727
Publikationsstatus	Veröffentlicht - 19 Sep 2016
Extern publiziert	Ja
Veranstaltung	2016 IEEE International Symposium on Electromagnetic Compatibility, EMC 2016 - Ottawa, Kanada Dauer: 25 Jul 2016 → 29 Jul 2016

Publikationsreihe

Name	IEEE International Symposium on Electromagnetic Compatibility
Band	2016-September
ISSN (Print)	1077-4076
ISSN (elektronisch)	2158-1118

Konferenz

Konferenz	2016 IEEE International Symposium on Electromagnetic Compatibility, EMC 2016
Land	Kanada
Ort	Ottawa
Zeitraum	25/07/16 → 29/07/16

ASJC Scopus subject areas

!!Condensed Matter Physics
!!Electrical and Electronic Engineering

Zugriff auf Dokument

10.1109/ISEMC.2016.7571727

http://www.scopus.com/inward/record.url?scp=84990911110&partnerID=8YFLogxK

Fingerprint Untersuchen Sie die Forschungsthemen von „Control design and application of a new ESD measurement system for influence analysis of different factors on parameters“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren

Ruan, F., Zhang, C., Xiao, W., Tian, M., Pommerenke, D., Su, M., ... Li, S. (2016). Control design and application of a new ESD measurement system for influence analysis of different factors on parameters. in 2016 IEEE International Symposium on Electromagnetic Compatibility, EMC 2016 (S. 663-666). [7571727] (IEEE International Symposium on Electromagnetic Compatibility; Band 2016-September). Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/ISEMC.2016.7571727

Control design and application of a new ESD measurement system for influence analysis of different factors on parameters. / Ruan, Fangming; Zhang, Chao; Xiao, Wenjun; Tian, Maochao; Pommerenke, David; Su, Ming; Zhi, Qijun; Wang, Heng; Wang, Yi; Yang, Xiaohong; Zhang, Junhua; Li, Sheng.

2016 IEEE International Symposium on Electromagnetic Compatibility, EMC 2016. Institute of Electrical and Electronics Engineers, 2016. S. 663-666 7571727 (IEEE International Symposium on Electromagnetic Compatibility; Band 2016-September).

Publikation: Beitrag in Buch/Bericht/Konferenzband › Beitrag in einem Konferenzband

Ruan, F, Zhang, C, Xiao, W, Tian, M, Pommerenke, D, Su, M, Zhi, Q, Wang, H, Wang, Y, Yang, X, Zhang, J & Li, S 2016, Control design and application of a new ESD measurement system for influence analysis of different factors on parameters. in 2016 IEEE International Symposium on Electromagnetic Compatibility, EMC 2016., 7571727, IEEE International Symposium on Electromagnetic Compatibility, Bd. 2016-September, Institute of Electrical and Electronics Engineers, S. 663-666, 2016 IEEE International Symposium on Electromagnetic Compatibility, EMC 2016, Ottawa, Kanada, 25/07/16. https://doi.org/10.1109/ISEMC.2016.7571727

Ruan F, Zhang C, Xiao W, Tian M, Pommerenke D, Su M et al. Control design and application of a new ESD measurement system for influence analysis of different factors on parameters. in 2016 IEEE International Symposium on Electromagnetic Compatibility, EMC 2016. Institute of Electrical and Electronics Engineers. 2016. S. 663-666. 7571727. (IEEE International Symposium on Electromagnetic Compatibility). https://doi.org/10.1109/ISEMC.2016.7571727

Ruan, Fangming ; Zhang, Chao ; Xiao, Wenjun ; Tian, Maochao ; Pommerenke, David ; Su, Ming ; Zhi, Qijun ; Wang, Heng ; Wang, Yi ; Yang, Xiaohong ; Zhang, Junhua ; Li, Sheng. / Control design and application of a new ESD measurement system for influence analysis of different factors on parameters. 2016 IEEE International Symposium on Electromagnetic Compatibility, EMC 2016. Institute of Electrical and Electronics Engineers, 2016. S. 663-666 (IEEE International Symposium on Electromagnetic Compatibility).

@inproceedings{102e694f7beb4e45af80b7bc00eb1c45,

title = "Control design and application of a new ESD measurement system for influence analysis of different factors on parameters",

abstract = "A new measurement system has been created for investigation of non-contact electrostatic discharge(ESD). An automotive control section of gas pressure was designed to meet the requirement of the new invented ESD measurement system. Experiment result with the new ESD measurement system shown that gas pressure and relative humidity have distinctive effect on peak value, rise/fall time of discharge current. Some possible mechanism was discussed for the influence of gas pressure and relative humidity. On-off state of solenoid valve was decided once received feedback signal from sensor through applying PID algorithm to output PWM impulse. Desired stable value can be obtained and improved performance of the new ESD measurement system.",

author = "Fangming Ruan and Chao Zhang and Wenjun Xiao and Maochao Tian and David Pommerenke and Ming Su and Qijun Zhi and Heng Wang and Yi Wang and Xiaohong Yang and Junhua Zhang and Sheng Li",

year = "2016",

month = "9",

day = "19",

doi = "10.1109/ISEMC.2016.7571727",

language = "English",

series = "IEEE International Symposium on Electromagnetic Compatibility",

publisher = "Institute of Electrical and Electronics Engineers",

pages = "663--666",

booktitle = "2016 IEEE International Symposium on Electromagnetic Compatibility, EMC 2016",

address = "United States",

}

TY - GEN

T1 - Control design and application of a new ESD measurement system for influence analysis of different factors on parameters

AU - Ruan, Fangming

AU - Zhang, Chao

AU - Xiao, Wenjun

AU - Tian, Maochao

AU - Pommerenke, David

AU - Su, Ming

AU - Zhi, Qijun

AU - Wang, Heng

AU - Wang, Yi

AU - Yang, Xiaohong

AU - Zhang, Junhua

AU - Li, Sheng

PY - 2016/9/19

Y1 - 2016/9/19

N2 - A new measurement system has been created for investigation of non-contact electrostatic discharge(ESD). An automotive control section of gas pressure was designed to meet the requirement of the new invented ESD measurement system. Experiment result with the new ESD measurement system shown that gas pressure and relative humidity have distinctive effect on peak value, rise/fall time of discharge current. Some possible mechanism was discussed for the influence of gas pressure and relative humidity. On-off state of solenoid valve was decided once received feedback signal from sensor through applying PID algorithm to output PWM impulse. Desired stable value can be obtained and improved performance of the new ESD measurement system.

AB - A new measurement system has been created for investigation of non-contact electrostatic discharge(ESD). An automotive control section of gas pressure was designed to meet the requirement of the new invented ESD measurement system. Experiment result with the new ESD measurement system shown that gas pressure and relative humidity have distinctive effect on peak value, rise/fall time of discharge current. Some possible mechanism was discussed for the influence of gas pressure and relative humidity. On-off state of solenoid valve was decided once received feedback signal from sensor through applying PID algorithm to output PWM impulse. Desired stable value can be obtained and improved performance of the new ESD measurement system.

UR - http://www.scopus.com/inward/record.url?scp=84990911110&partnerID=8YFLogxK

U2 - 10.1109/ISEMC.2016.7571727

DO - 10.1109/ISEMC.2016.7571727

M3 - Conference contribution

AN - SCOPUS:84990911110

T3 - IEEE International Symposium on Electromagnetic Compatibility

SP - 663

EP - 666

BT - 2016 IEEE International Symposium on Electromagnetic Compatibility, EMC 2016

PB - Institute of Electrical and Electronics Engineers

ER -