Condition monitoring of concrete structures using wireless sensor networks and MEMS

Christian U. Grosse, Steven D. Glaser, Markus Krüger

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandForschungBegutachtung

Abstract

The inspection of building structures, especially bridges, is currently made by visual inspection. The few non-visual methodologies make use of wired sensor networks, which are relatively expensive, vulnerable to damage, and time consuming to install. Systems based on wireless sensor networks should be both cost efficient and easy to install, scalable and adaptive to different type of structures. Acoustic emission techniques are an additional monitoring method to investigate the status of a bridge or some of its components. It has the potential to detect defects in terms of cracks propagating during the routine use of structures. However, acoustic emissions recording and analysis techniques need powerful algorithms to handle and reduce the immense amount of data generated. These algorithms are developed on the basis of neural network techniques and regarding localization of defects - by array techniques. Sensors with low price are essential for such monitoring systems to be accepted. Although the development costs of such a system are relatively high, the target price for the entire monitoring system will be several thousands Euro, depending on the size of the structure and the number of sensors necessary to cover the most important parts of the structure. Micro-Electro-Mechanical-Systems and hybrid sensors form the heart of Motes (network nodes). The network combined multi-hop data transmission techniques with efficient data pre-processing in the nodes. Using this technique, monitoring of large structures in civil engineering becomes very efficient including the sensing of temperature, moisture, strain and other data continuously. In this paper, the basic principles of a wireless monitoring system equipped with MEMS sensors is presented along with a first prototype. The authors work on details of network configuration, power consumption, data acquisition and data aggregation, signal analysis and data reduction is presented.

Originalspracheenglisch
TitelSmart Structures and Materials 2006 - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems
Band6174 I
DOIs
PublikationsstatusVeröffentlicht - 20 Jul 2006
Extern publiziertJa
VeranstaltungSmart Structures and Materials 2006 - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems - San Diego, CA, USA / Vereinigte Staaten
Dauer: 27 Feb 20062 Mär 2006

Konferenz

KonferenzSmart Structures and Materials 2006 - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems
LandUSA / Vereinigte Staaten
OrtSan Diego, CA
Zeitraum27/02/062/03/06

Fingerprint

concrete structures
Condition Monitoring
Concrete Structures
Condition monitoring
Micro-electro-mechanical Systems
Concrete construction
microelectromechanical systems
MEMS
Wireless Sensor Networks
Wireless sensor networks
Monitoring
sensors
Monitoring System
Sensor
Acoustic emissions
Acoustic Emission
acoustic emission
Sensors
Inspection
Hybrid sensors

Schlagwörter

    ASJC Scopus subject areas

    • !!Electronic, Optical and Magnetic Materials
    • !!Condensed Matter Physics
    • !!Computer Science Applications
    • Angewandte Mathematik
    • !!Electrical and Electronic Engineering

    Dies zitieren

    Grosse, C. U., Glaser, S. D., & Krüger, M. (2006). Condition monitoring of concrete structures using wireless sensor networks and MEMS. in Smart Structures and Materials 2006 - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems (Band 6174 I). [61741C] https://doi.org/10.1117/12.657303

    Condition monitoring of concrete structures using wireless sensor networks and MEMS. / Grosse, Christian U.; Glaser, Steven D.; Krüger, Markus.

    Smart Structures and Materials 2006 - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems. Band 6174 I 2006. 61741C.

    Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandForschungBegutachtung

    Grosse, CU, Glaser, SD & Krüger, M 2006, Condition monitoring of concrete structures using wireless sensor networks and MEMS. in Smart Structures and Materials 2006 - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems. Bd. 6174 I, 61741C, San Diego, CA, USA / Vereinigte Staaten, 27/02/06. https://doi.org/10.1117/12.657303
    Grosse CU, Glaser SD, Krüger M. Condition monitoring of concrete structures using wireless sensor networks and MEMS. in Smart Structures and Materials 2006 - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems. Band 6174 I. 2006. 61741C https://doi.org/10.1117/12.657303
    Grosse, Christian U. ; Glaser, Steven D. ; Krüger, Markus. / Condition monitoring of concrete structures using wireless sensor networks and MEMS. Smart Structures and Materials 2006 - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems. Band 6174 I 2006.
    @inproceedings{b68bbbfb171244b2b5d5127af604a638,
    title = "Condition monitoring of concrete structures using wireless sensor networks and MEMS",
    abstract = "The inspection of building structures, especially bridges, is currently made by visual inspection. The few non-visual methodologies make use of wired sensor networks, which are relatively expensive, vulnerable to damage, and time consuming to install. Systems based on wireless sensor networks should be both cost efficient and easy to install, scalable and adaptive to different type of structures. Acoustic emission techniques are an additional monitoring method to investigate the status of a bridge or some of its components. It has the potential to detect defects in terms of cracks propagating during the routine use of structures. However, acoustic emissions recording and analysis techniques need powerful algorithms to handle and reduce the immense amount of data generated. These algorithms are developed on the basis of neural network techniques and regarding localization of defects - by array techniques. Sensors with low price are essential for such monitoring systems to be accepted. Although the development costs of such a system are relatively high, the target price for the entire monitoring system will be several thousands Euro, depending on the size of the structure and the number of sensors necessary to cover the most important parts of the structure. Micro-Electro-Mechanical-Systems and hybrid sensors form the heart of Motes (network nodes). The network combined multi-hop data transmission techniques with efficient data pre-processing in the nodes. Using this technique, monitoring of large structures in civil engineering becomes very efficient including the sensing of temperature, moisture, strain and other data continuously. In this paper, the basic principles of a wireless monitoring system equipped with MEMS sensors is presented along with a first prototype. The authors work on details of network configuration, power consumption, data acquisition and data aggregation, signal analysis and data reduction is presented.",
    keywords = "Acoustic emission, Concrete, MEMS, Monitoring, Structures, Wireless sensor networks",
    author = "Grosse, {Christian U.} and Glaser, {Steven D.} and Markus Kr{\"u}ger",
    year = "2006",
    month = "7",
    day = "20",
    doi = "10.1117/12.657303",
    language = "English",
    isbn = "0819462276",
    volume = "6174 I",
    booktitle = "Smart Structures and Materials 2006 - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems",

    }

    TY - GEN

    T1 - Condition monitoring of concrete structures using wireless sensor networks and MEMS

    AU - Grosse, Christian U.

    AU - Glaser, Steven D.

    AU - Krüger, Markus

    PY - 2006/7/20

    Y1 - 2006/7/20

    N2 - The inspection of building structures, especially bridges, is currently made by visual inspection. The few non-visual methodologies make use of wired sensor networks, which are relatively expensive, vulnerable to damage, and time consuming to install. Systems based on wireless sensor networks should be both cost efficient and easy to install, scalable and adaptive to different type of structures. Acoustic emission techniques are an additional monitoring method to investigate the status of a bridge or some of its components. It has the potential to detect defects in terms of cracks propagating during the routine use of structures. However, acoustic emissions recording and analysis techniques need powerful algorithms to handle and reduce the immense amount of data generated. These algorithms are developed on the basis of neural network techniques and regarding localization of defects - by array techniques. Sensors with low price are essential for such monitoring systems to be accepted. Although the development costs of such a system are relatively high, the target price for the entire monitoring system will be several thousands Euro, depending on the size of the structure and the number of sensors necessary to cover the most important parts of the structure. Micro-Electro-Mechanical-Systems and hybrid sensors form the heart of Motes (network nodes). The network combined multi-hop data transmission techniques with efficient data pre-processing in the nodes. Using this technique, monitoring of large structures in civil engineering becomes very efficient including the sensing of temperature, moisture, strain and other data continuously. In this paper, the basic principles of a wireless monitoring system equipped with MEMS sensors is presented along with a first prototype. The authors work on details of network configuration, power consumption, data acquisition and data aggregation, signal analysis and data reduction is presented.

    AB - The inspection of building structures, especially bridges, is currently made by visual inspection. The few non-visual methodologies make use of wired sensor networks, which are relatively expensive, vulnerable to damage, and time consuming to install. Systems based on wireless sensor networks should be both cost efficient and easy to install, scalable and adaptive to different type of structures. Acoustic emission techniques are an additional monitoring method to investigate the status of a bridge or some of its components. It has the potential to detect defects in terms of cracks propagating during the routine use of structures. However, acoustic emissions recording and analysis techniques need powerful algorithms to handle and reduce the immense amount of data generated. These algorithms are developed on the basis of neural network techniques and regarding localization of defects - by array techniques. Sensors with low price are essential for such monitoring systems to be accepted. Although the development costs of such a system are relatively high, the target price for the entire monitoring system will be several thousands Euro, depending on the size of the structure and the number of sensors necessary to cover the most important parts of the structure. Micro-Electro-Mechanical-Systems and hybrid sensors form the heart of Motes (network nodes). The network combined multi-hop data transmission techniques with efficient data pre-processing in the nodes. Using this technique, monitoring of large structures in civil engineering becomes very efficient including the sensing of temperature, moisture, strain and other data continuously. In this paper, the basic principles of a wireless monitoring system equipped with MEMS sensors is presented along with a first prototype. The authors work on details of network configuration, power consumption, data acquisition and data aggregation, signal analysis and data reduction is presented.

    KW - Acoustic emission

    KW - Concrete

    KW - MEMS

    KW - Monitoring

    KW - Structures

    KW - Wireless sensor networks

    UR - http://www.scopus.com/inward/record.url?scp=33745950308&partnerID=8YFLogxK

    U2 - 10.1117/12.657303

    DO - 10.1117/12.657303

    M3 - Conference contribution

    SN - 0819462276

    SN - 9780819462275

    VL - 6174 I

    BT - Smart Structures and Materials 2006 - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems

    ER -