Characterization of Surface and Structure of In Situ Doped Sol-Gel-Derived Silicon Carbide

Olivia Kettner, Sanja Šimić, Birgit Kunert, Robert Schennach, Roland Resel, Thomas Grießer, Bettina Friedel

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Abstract

Silicon carbide (SiC), is an artificial semiconductor used for high-power transistors and blue LEDs, for its extraordinary properties. SiC will be attractive for more applications, but large-scale or large-surface area fabrication, with control over defects and surface is challenging. Sol-gel based techniques are an affordable alternative toward such requirements. This report describes two types of microcrystalline SiC derived after carbothermal reduction from sol-gel-based precursors, one with nitrogen added, the other aluminum. Characterization of their bulk, structure, and surface shows that incorporation of dopants affects the formation of polytypes and surface chemistry. Nitrogen leads exclusively to cubic SiC, exhibiting a native oxide surface. Presence of aluminum instead promotes growth of hexagonal polytypes and induces self-passivation of the crystallites' surface during growth. This is established by hydrogenation of silicon bonds and formation of a protecting aluminum carbonate species. XPS provides support for the suggested mechanism. This passivation is achieved in only one step, solely by aluminum in the precursor. Hence, it is shown that growth, doping and passivation of SiC can be performed as "one-pot synthesis". Material without insulating oxide and a limited number of defects is highly valuable for applications involving surface-sensitive charge-transfer reactions, therefore the potential of this method is significant.

Originalspracheenglisch
Aufsatznummer1701067
Seiten (von - bis)1-9
FachzeitschriftAdvanced Engineering Materials
Jahrgang20
DOIs
PublikationsstatusVeröffentlicht - 2018

Fingerprint

Silicon carbide
silicon carbides
Sol-gels
gels
Aluminum
Passivation
passivity
aluminum
Oxides
Nitrogen
Doping (additives)
Microcrystalline silicon
Carbothermal reduction
Defects
Insulating materials
Carbonates
nitrogen
Silicon
Surface chemistry
oxides

Schlagwörter

    ASJC Scopus subject areas

    • !!Materials Science(all)
    • !!Condensed Matter Physics

    Dies zitieren

    Characterization of Surface and Structure of In Situ Doped Sol-Gel-Derived Silicon Carbide. / Kettner, Olivia; Šimić, Sanja; Kunert, Birgit; Schennach, Robert; Resel, Roland; Grießer, Thomas; Friedel, Bettina.

    in: Advanced Engineering Materials, Jahrgang 20, 1701067 , 2018, S. 1-9.

    Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

    @article{3ae6a7ec2b33410a811820942c5a2932,
    title = "Characterization of Surface and Structure of In Situ Doped Sol-Gel-Derived Silicon Carbide",
    abstract = "Silicon carbide (SiC), is an artificial semiconductor used for high-power transistors and blue LEDs, for its extraordinary properties. SiC will be attractive for more applications, but large-scale or large-surface area fabrication, with control over defects and surface is challenging. Sol-gel based techniques are an affordable alternative toward such requirements. This report describes two types of microcrystalline SiC derived after carbothermal reduction from sol-gel-based precursors, one with nitrogen added, the other aluminum. Characterization of their bulk, structure, and surface shows that incorporation of dopants affects the formation of polytypes and surface chemistry. Nitrogen leads exclusively to cubic SiC, exhibiting a native oxide surface. Presence of aluminum instead promotes growth of hexagonal polytypes and induces self-passivation of the crystallites' surface during growth. This is established by hydrogenation of silicon bonds and formation of a protecting aluminum carbonate species. XPS provides support for the suggested mechanism. This passivation is achieved in only one step, solely by aluminum in the precursor. Hence, it is shown that growth, doping and passivation of SiC can be performed as {"}one-pot synthesis{"}. Material without insulating oxide and a limited number of defects is highly valuable for applications involving surface-sensitive charge-transfer reactions, therefore the potential of this method is significant.",
    keywords = "Self-passivation, Silicon carbide, Sol-gel processing, Surface termination",
    author = "Olivia Kettner and Sanja Šimić and Birgit Kunert and Robert Schennach and Roland Resel and Thomas Grie{\ss}er and Bettina Friedel",
    year = "2018",
    doi = "10.1002/adem.201701067",
    language = "English",
    volume = "20",
    pages = "1--9",
    journal = "Advanced Engineering Materials",
    issn = "1438-1656",
    publisher = "Wiley-VCH",

    }

    TY - JOUR

    T1 - Characterization of Surface and Structure of In Situ Doped Sol-Gel-Derived Silicon Carbide

    AU - Kettner, Olivia

    AU - Šimić, Sanja

    AU - Kunert, Birgit

    AU - Schennach, Robert

    AU - Resel, Roland

    AU - Grießer, Thomas

    AU - Friedel, Bettina

    PY - 2018

    Y1 - 2018

    N2 - Silicon carbide (SiC), is an artificial semiconductor used for high-power transistors and blue LEDs, for its extraordinary properties. SiC will be attractive for more applications, but large-scale or large-surface area fabrication, with control over defects and surface is challenging. Sol-gel based techniques are an affordable alternative toward such requirements. This report describes two types of microcrystalline SiC derived after carbothermal reduction from sol-gel-based precursors, one with nitrogen added, the other aluminum. Characterization of their bulk, structure, and surface shows that incorporation of dopants affects the formation of polytypes and surface chemistry. Nitrogen leads exclusively to cubic SiC, exhibiting a native oxide surface. Presence of aluminum instead promotes growth of hexagonal polytypes and induces self-passivation of the crystallites' surface during growth. This is established by hydrogenation of silicon bonds and formation of a protecting aluminum carbonate species. XPS provides support for the suggested mechanism. This passivation is achieved in only one step, solely by aluminum in the precursor. Hence, it is shown that growth, doping and passivation of SiC can be performed as "one-pot synthesis". Material without insulating oxide and a limited number of defects is highly valuable for applications involving surface-sensitive charge-transfer reactions, therefore the potential of this method is significant.

    AB - Silicon carbide (SiC), is an artificial semiconductor used for high-power transistors and blue LEDs, for its extraordinary properties. SiC will be attractive for more applications, but large-scale or large-surface area fabrication, with control over defects and surface is challenging. Sol-gel based techniques are an affordable alternative toward such requirements. This report describes two types of microcrystalline SiC derived after carbothermal reduction from sol-gel-based precursors, one with nitrogen added, the other aluminum. Characterization of their bulk, structure, and surface shows that incorporation of dopants affects the formation of polytypes and surface chemistry. Nitrogen leads exclusively to cubic SiC, exhibiting a native oxide surface. Presence of aluminum instead promotes growth of hexagonal polytypes and induces self-passivation of the crystallites' surface during growth. This is established by hydrogenation of silicon bonds and formation of a protecting aluminum carbonate species. XPS provides support for the suggested mechanism. This passivation is achieved in only one step, solely by aluminum in the precursor. Hence, it is shown that growth, doping and passivation of SiC can be performed as "one-pot synthesis". Material without insulating oxide and a limited number of defects is highly valuable for applications involving surface-sensitive charge-transfer reactions, therefore the potential of this method is significant.

    KW - Self-passivation

    KW - Silicon carbide

    KW - Sol-gel processing

    KW - Surface termination

    UR - http://www.scopus.com/inward/record.url?scp=85042465639&partnerID=8YFLogxK

    U2 - 10.1002/adem.201701067

    DO - 10.1002/adem.201701067

    M3 - Article

    VL - 20

    SP - 1

    EP - 9

    JO - Advanced Engineering Materials

    JF - Advanced Engineering Materials

    SN - 1438-1656

    M1 - 1701067

    ER -