Cavitation as a limiting factor for the empowering of a Kaplan turbine – CFD calculations, test rig results and operational experience

Helmut Benigni, Jürgen Schiffer-Rosenberger, Gerhard Penninger, Christian Weichselbraun, Michael Artmann, Lutz Juhrig, Martin Becker, Timo Krappel, Helmut Jaberg

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem Konferenzband

Abstract

The Krippau run-of-river hydropower plant is revitalized, and for this purpose, a new runner was developed. The 24 MW power plant was commissioned in 1965 and is equipped with only one unit. The refurbishment aims at an increase of the efficiency in the relevant operating range of the turbine through a runner replacement (while maintaining the runner diameter). Furthermore, the maximum discharge shall be increased from 120 m³/s to 135 m³/s and the annual production by 4% The new design of the runner with a diameter of D = 4.1 m was developed using computational fluid dynamics simulations and finally checked by a model test according to IEC 60193. Due to given plant sigma values, which generally do not allow for such an extension in the operation range, the particular focus lay on cavitation performance, as it was a big challenge to achieve acceptable cavitation characteristics.
Originalspracheenglisch
TitelConference Proceedings Hydro 2020
KapitelSession9
Seiten1-10
Seitenumfang10
PublikationsstatusVeröffentlicht - 26 Okt 2020
VeranstaltungHydro 2020 - Virtuell, Frankreich
Dauer: 26 Okt 202028 Okt 2020
Konferenznummer: 2020

Konferenz

KonferenzHydro 2020
KurztitelHydro
LandFrankreich
OrtVirtuell
Zeitraum26/10/2028/10/20

ASJC Scopus subject areas

  • !!Energy(all)

Fields of Expertise

  • Sustainable Systems

Dieses zitieren