Applicability of IEC 60270 for Partial Discharge Measurements under DC Voltage - Results of a Round Robin Test

Michael Hartje, Lars Kästingschäfer, Farahani, Werle, Alexander Pirker, Uwe Schichler

Publikation: KonferenzbeitragPaperForschungBegutachtung

Abstract

PD measurements during AC voltage stress are well known and approved since many decades and are performed today in accordance with the international standard IEC 60270. PD measurements during DC voltage stress become more and more important due to the increasing use of HVDC transmission systems, but the experience and also the information concerning this method in the IEC 60270 is less comprehensive. Therefore it is necessary to investigate the applicability of the IEC 60270 on PD measurements in the case of DC voltages. For the investigations a series of PD measurements have been done at DC as well as on AC voltages on insulators, which were made out of cast resin. The PD measurements have been performed according to IEC 60270 as a round robin test in three independent high voltage laboratories. In this paper the results of the round robin test are summarized and evaluated in order to discuss the applicability of IEC 60270 for PD measurements at DC voltage. Based on the results a discussion is started concerning possible modifications of the IEC 60270 for its use on PD measurements during DC stress.
Originalspracheenglisch
Seitenumfang6
PublikationsstatusVeröffentlicht - 1 Sep 2017
Veranstaltung20th International Symposium on High Voltage Engineering - Buenos Aires, Argentinien
Dauer: 27 Aug 20171 Sep 2017
http://www.ish2017.org/

Konferenz

Konferenz20th International Symposium on High Voltage Engineering
KurztitelISH 2017
LandArgentinien
OrtBuenos Aires
Zeitraum27/08/171/09/17
Internetadresse

Fields of Expertise

  • Sustainable Systems

Dies zitieren

Hartje, M., Kästingschäfer, L., Farahani, Werle, Pirker, A., & Schichler, U. (2017). Applicability of IEC 60270 for Partial Discharge Measurements under DC Voltage - Results of a Round Robin Test. Beitrag in 20th International Symposium on High Voltage Engineering, Buenos Aires, Argentinien.

Applicability of IEC 60270 for Partial Discharge Measurements under DC Voltage - Results of a Round Robin Test. / Hartje, Michael; Kästingschäfer, Lars; Farahani; Werle, ; Pirker, Alexander; Schichler, Uwe.

2017. Beitrag in 20th International Symposium on High Voltage Engineering, Buenos Aires, Argentinien.

Publikation: KonferenzbeitragPaperForschungBegutachtung

Hartje, M, Kästingschäfer, L, Farahani, Werle, , Pirker, A & Schichler, U 2017, 'Applicability of IEC 60270 for Partial Discharge Measurements under DC Voltage - Results of a Round Robin Test' Beitrag in 20th International Symposium on High Voltage Engineering, Buenos Aires, Argentinien, 27/08/17 - 1/09/17, .
Hartje M, Kästingschäfer L, Farahani, Werle , Pirker A, Schichler U. Applicability of IEC 60270 for Partial Discharge Measurements under DC Voltage - Results of a Round Robin Test. 2017. Beitrag in 20th International Symposium on High Voltage Engineering, Buenos Aires, Argentinien.
Hartje, Michael ; Kästingschäfer, Lars ; Farahani ; Werle, ; Pirker, Alexander ; Schichler, Uwe. / Applicability of IEC 60270 for Partial Discharge Measurements under DC Voltage - Results of a Round Robin Test. Beitrag in 20th International Symposium on High Voltage Engineering, Buenos Aires, Argentinien.6 S.
@conference{322f67a244f246579d52527d646c892d,
title = "Applicability of IEC 60270 for Partial Discharge Measurements under DC Voltage - Results of a Round Robin Test",
abstract = "PD measurements during AC voltage stress are well known and approved since many decades and are performed today in accordance with the international standard IEC 60270. PD measurements during DC voltage stress become more and more important due to the increasing use of HVDC transmission systems, but the experience and also the information concerning this method in the IEC 60270 is less comprehensive. Therefore it is necessary to investigate the applicability of the IEC 60270 on PD measurements in the case of DC voltages. For the investigations a series of PD measurements have been done at DC as well as on AC voltages on insulators, which were made out of cast resin. The PD measurements have been performed according to IEC 60270 as a round robin test in three independent high voltage laboratories. In this paper the results of the round robin test are summarized and evaluated in order to discuss the applicability of IEC 60270 for PD measurements at DC voltage. Based on the results a discussion is started concerning possible modifications of the IEC 60270 for its use on PD measurements during DC stress.",
author = "Michael Hartje and Lars K{\"a}stingsch{\"a}fer and Farahani and Werle and Alexander Pirker and Uwe Schichler",
year = "2017",
month = "9",
day = "1",
language = "English",
note = "20th International Symposium on High Voltage Engineering, ISH 2017 ; Conference date: 27-08-2017 Through 01-09-2017",
url = "http://www.ish2017.org/",

}

TY - CONF

T1 - Applicability of IEC 60270 for Partial Discharge Measurements under DC Voltage - Results of a Round Robin Test

AU - Hartje, Michael

AU - Kästingschäfer, Lars

AU - Farahani,

AU - Werle,

AU - Pirker, Alexander

AU - Schichler, Uwe

PY - 2017/9/1

Y1 - 2017/9/1

N2 - PD measurements during AC voltage stress are well known and approved since many decades and are performed today in accordance with the international standard IEC 60270. PD measurements during DC voltage stress become more and more important due to the increasing use of HVDC transmission systems, but the experience and also the information concerning this method in the IEC 60270 is less comprehensive. Therefore it is necessary to investigate the applicability of the IEC 60270 on PD measurements in the case of DC voltages. For the investigations a series of PD measurements have been done at DC as well as on AC voltages on insulators, which were made out of cast resin. The PD measurements have been performed according to IEC 60270 as a round robin test in three independent high voltage laboratories. In this paper the results of the round robin test are summarized and evaluated in order to discuss the applicability of IEC 60270 for PD measurements at DC voltage. Based on the results a discussion is started concerning possible modifications of the IEC 60270 for its use on PD measurements during DC stress.

AB - PD measurements during AC voltage stress are well known and approved since many decades and are performed today in accordance with the international standard IEC 60270. PD measurements during DC voltage stress become more and more important due to the increasing use of HVDC transmission systems, but the experience and also the information concerning this method in the IEC 60270 is less comprehensive. Therefore it is necessary to investigate the applicability of the IEC 60270 on PD measurements in the case of DC voltages. For the investigations a series of PD measurements have been done at DC as well as on AC voltages on insulators, which were made out of cast resin. The PD measurements have been performed according to IEC 60270 as a round robin test in three independent high voltage laboratories. In this paper the results of the round robin test are summarized and evaluated in order to discuss the applicability of IEC 60270 for PD measurements at DC voltage. Based on the results a discussion is started concerning possible modifications of the IEC 60270 for its use on PD measurements during DC stress.

M3 - Paper

ER -