Aerodynamic performance of turbine center frames with purge flows-part II: The influence of individual hub and tip purge flows

Stefan Zerobin, Christian Aldrian, Andreas Peters, Franz Heitmeir, Emil Göttlich

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Abstract

The aerodynamic behavior of turbine center frame (TCF) ducts under the presence of high-pressure turbine (HPT) purge flows was experimentally investigated in this two-part paper. While the first part of the paper demonstrated the impact of varying the purge flow rates (PFR) on the loss behavior of two different TCF designs, the second part concentrates on the influence of individual hub and tip purge flows on the main flow evolution and loss generation mechanisms through the TCF ducts. Therefore, measurements were conducted at six different operating conditions in a one and a half stage turbine test setup, featuring four individual purge flows injected through the hub and tip, forward and aft cavities of the HPT rotor. The outcomes of this first-time assessment indicate that a HPT purge flow reduction generally benefits TCF performance. Decreasing one of the rotor case PFRs leads to an improved duct pressure loss. The purge flows from the rotor aft hub and tip cavities are demonstrated to play a particularly important role for improving the duct aerodynamic behavior. In contrast, the forward rotor hub purge flow actually stabilizes the flow in the TCF duct and reducing this purge flow can penalize TCF performance. These particular HPT/TCF interactions should be taken into account whenever high-pressure turbine purge flow reductions are pursued.

Spracheenglisch
Aufsatznummer061010
FachzeitschriftJournal of Turbomachinery
Jahrgang140
Ausgabennummer6
DOIs
StatusVeröffentlicht - 1 Mai 2018

Fingerprint

Aerodynamics
Turbines
Ducts
Rotors
Flow rate

ASJC Scopus subject areas

  • !!Mechanical Engineering

Dies zitieren

Aerodynamic performance of turbine center frames with purge flows-part II : The influence of individual hub and tip purge flows. / Zerobin, Stefan; Aldrian, Christian; Peters, Andreas; Heitmeir, Franz; Göttlich, Emil.

in: Journal of Turbomachinery, Jahrgang 140, Nr. 6, 061010, 01.05.2018.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

@article{239f89e5740d4d07a48c6c4a93ba2b79,
title = "Aerodynamic performance of turbine center frames with purge flows-part II: The influence of individual hub and tip purge flows",
abstract = "The aerodynamic behavior of turbine center frame (TCF) ducts under the presence of high-pressure turbine (HPT) purge flows was experimentally investigated in this two-part paper. While the first part of the paper demonstrated the impact of varying the purge flow rates (PFR) on the loss behavior of two different TCF designs, the second part concentrates on the influence of individual hub and tip purge flows on the main flow evolution and loss generation mechanisms through the TCF ducts. Therefore, measurements were conducted at six different operating conditions in a one and a half stage turbine test setup, featuring four individual purge flows injected through the hub and tip, forward and aft cavities of the HPT rotor. The outcomes of this first-time assessment indicate that a HPT purge flow reduction generally benefits TCF performance. Decreasing one of the rotor case PFRs leads to an improved duct pressure loss. The purge flows from the rotor aft hub and tip cavities are demonstrated to play a particularly important role for improving the duct aerodynamic behavior. In contrast, the forward rotor hub purge flow actually stabilizes the flow in the TCF duct and reducing this purge flow can penalize TCF performance. These particular HPT/TCF interactions should be taken into account whenever high-pressure turbine purge flow reductions are pursued.",
author = "Stefan Zerobin and Christian Aldrian and Andreas Peters and Franz Heitmeir and Emil G{\"o}ttlich",
year = "2018",
month = "5",
day = "1",
doi = "10.1115/1.4039363",
language = "English",
volume = "140",
journal = "Journal of Turbomachinery",
issn = "0889-504X",
publisher = "American Society of Mechanical Engineers(ASME)",
number = "6",

}

TY - JOUR

T1 - Aerodynamic performance of turbine center frames with purge flows-part II

T2 - Journal of Turbomachinery

AU - Zerobin, Stefan

AU - Aldrian, Christian

AU - Peters, Andreas

AU - Heitmeir, Franz

AU - Göttlich, Emil

PY - 2018/5/1

Y1 - 2018/5/1

N2 - The aerodynamic behavior of turbine center frame (TCF) ducts under the presence of high-pressure turbine (HPT) purge flows was experimentally investigated in this two-part paper. While the first part of the paper demonstrated the impact of varying the purge flow rates (PFR) on the loss behavior of two different TCF designs, the second part concentrates on the influence of individual hub and tip purge flows on the main flow evolution and loss generation mechanisms through the TCF ducts. Therefore, measurements were conducted at six different operating conditions in a one and a half stage turbine test setup, featuring four individual purge flows injected through the hub and tip, forward and aft cavities of the HPT rotor. The outcomes of this first-time assessment indicate that a HPT purge flow reduction generally benefits TCF performance. Decreasing one of the rotor case PFRs leads to an improved duct pressure loss. The purge flows from the rotor aft hub and tip cavities are demonstrated to play a particularly important role for improving the duct aerodynamic behavior. In contrast, the forward rotor hub purge flow actually stabilizes the flow in the TCF duct and reducing this purge flow can penalize TCF performance. These particular HPT/TCF interactions should be taken into account whenever high-pressure turbine purge flow reductions are pursued.

AB - The aerodynamic behavior of turbine center frame (TCF) ducts under the presence of high-pressure turbine (HPT) purge flows was experimentally investigated in this two-part paper. While the first part of the paper demonstrated the impact of varying the purge flow rates (PFR) on the loss behavior of two different TCF designs, the second part concentrates on the influence of individual hub and tip purge flows on the main flow evolution and loss generation mechanisms through the TCF ducts. Therefore, measurements were conducted at six different operating conditions in a one and a half stage turbine test setup, featuring four individual purge flows injected through the hub and tip, forward and aft cavities of the HPT rotor. The outcomes of this first-time assessment indicate that a HPT purge flow reduction generally benefits TCF performance. Decreasing one of the rotor case PFRs leads to an improved duct pressure loss. The purge flows from the rotor aft hub and tip cavities are demonstrated to play a particularly important role for improving the duct aerodynamic behavior. In contrast, the forward rotor hub purge flow actually stabilizes the flow in the TCF duct and reducing this purge flow can penalize TCF performance. These particular HPT/TCF interactions should be taken into account whenever high-pressure turbine purge flow reductions are pursued.

UR - http://www.scopus.com/inward/record.url?scp=85046642051&partnerID=8YFLogxK

U2 - 10.1115/1.4039363

DO - 10.1115/1.4039363

M3 - Article

VL - 140

JO - Journal of Turbomachinery

JF - Journal of Turbomachinery

SN - 0889-504X

IS - 6

M1 - 061010

ER -