A radiation-hard curvature compensated bandgap voltage reference

In this work a radiation-hardened bandgap voltage reference circuit is presented. The circuit is targeted at precision applications, where trimming can be used to achieve a temperature coefficient smaller than 5ppm/K. Curvature compensation is employed and trimming of the temperature coefficient and the curvature is possible. In order to achieve good performance several techniques were combined. Radiation hardening techniques on layout level were used along with design techniques to improve the robustness against total ionizing dose (TID) and process variations. The radiation hardness requirements were set after preliminary irradiation tests. At the layout level optimized transistors were used while at the topology level, a radiation-hardened trimming scheme was employed to mitigate the impact of leakage currents. Chopping techniques were required to ensure good performance over the process and temperature variations. The bandgap was realized in a standard 180 nm CMOS process and circuit performance was verified using extensive simulations.