A minimal continuum representation of a transverse isotropic viscoelastic pulp fibre based on micromechanical measurements

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Abstract

We propose a minimum input mechanical model of pulp fibres. A pulp fibre can be idealised as a complex compound bar, microfibrils render its behaviour anisotropic. The objective of this work is twofold: (i) develop an anisotropic viscoelastic material model of a pulp fibre that shows the essential characteristics with a minimum number of material parameters and (ii) establish suitable experiments with pulp fibres for obtaining these parameters. The model consists of an additive combination of elastic potentials for an isotropic and an anisotropic part. Viscoelasticity is implemented by a generalised Maxwell model. We suggest an incompressible treatment of the material to relate experiments and material parameters in a well-defined manner. By this means, the calibration of the parameters is performed with only two micromechanical experiments, atomic force microscopy nanoindentation on the fibre's surface and uniaxial tensile tests. We advocate this strategy for certain applications, such as in paper network simulations or fibres in a dry state, when the fibre's compressibility is of minor importance. The results of this analysis show a good performance of the proposed model applied to pulp fibres.

Originalspracheenglisch
Seiten (von - bis)149-161
Seitenumfang13
FachzeitschriftMechanics of Materials
Jahrgang135
DOIs
PublikationsstatusVeröffentlicht - 2019

Fingerprint

Pulp
continuums
fibers
Fibers
complex compounds
Experiments
viscoelasticity
Viscoelasticity
Nanoindentation
tensile tests
nanoindentation
Compressibility
compressibility
Atomic force microscopy
atomic force microscopy
Calibration
simulation

Schlagwörter

  • Pulp fibres
  • Viscoelasticity
  • Invariant-based
  • Nanoindentation
  • Atomic force microscopy (AFM)
  • Transverse isotropy
  • Micromechanical testing

ASJC Scopus subject areas

  • !!Mechanics of Materials
  • !!Instrumentation
  • !!Materials Science(all)

Dies zitieren

A minimal continuum representation of a transverse isotropic viscoelastic pulp fibre based on micromechanical measurements. / Seidlhofer, Tristan; Czibula, Caterina Marina; Teichert , Christian; Payerl, Claudia; Hirn, Ulrich; Ulz, Manfred Hannes.

in: Mechanics of Materials, Jahrgang 135, 2019, S. 149-161.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

@article{7f6238bda7eb4769b9f8d2f530beeb39,
title = "A minimal continuum representation of a transverse isotropic viscoelastic pulp fibre based on micromechanical measurements",
abstract = "We propose a minimum input mechanical model of pulp fibres. A pulp fibre can be idealised as a complex compound bar, microfibrils render its behaviour anisotropic. The objective of this work is twofold: (i) develop an anisotropic viscoelastic material model of a pulp fibre that shows the essential characteristics with a minimum number of material parameters and (ii) establish suitable experiments with pulp fibres for obtaining these parameters. The model consists of an additive combination of elastic potentials for an isotropic and an anisotropic part. Viscoelasticity is implemented by a generalised Maxwell model. We suggest an incompressible treatment of the material to relate experiments and material parameters in a well-defined manner. By this means, the calibration of the parameters is performed with only two micromechanical experiments, atomic force microscopy nanoindentation on the fibre's surface and uniaxial tensile tests. We advocate this strategy for certain applications, such as in paper network simulations or fibres in a dry state, when the fibre's compressibility is of minor importance. The results of this analysis show a good performance of the proposed model applied to pulp fibres.",
keywords = "Pulp fibres, Viscoelasticity, Invariant-based, Nanoindentation, Atomic force microscopy (AFM), Transverse isotropy, Micromechanical testing, Atomic force microscopy, Invariant-based, Micromechanical testing, Nanoindentation, Pulp fibres, Transverse isotropy, Viscoelasticity",
author = "Tristan Seidlhofer and Czibula, {Caterina Marina} and Christian Teichert and Claudia Payerl and Ulrich Hirn and Ulz, {Manfred Hannes}",
year = "2019",
doi = "10.1016/j.mechmat.2019.04.012",
language = "English",
volume = "135",
pages = "149--161",
journal = "Mechanics of Materials",
issn = "0167-6636",
publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - A minimal continuum representation of a transverse isotropic viscoelastic pulp fibre based on micromechanical measurements

AU - Seidlhofer, Tristan

AU - Czibula, Caterina Marina

AU - Teichert , Christian

AU - Payerl, Claudia

AU - Hirn, Ulrich

AU - Ulz, Manfred Hannes

PY - 2019

Y1 - 2019

N2 - We propose a minimum input mechanical model of pulp fibres. A pulp fibre can be idealised as a complex compound bar, microfibrils render its behaviour anisotropic. The objective of this work is twofold: (i) develop an anisotropic viscoelastic material model of a pulp fibre that shows the essential characteristics with a minimum number of material parameters and (ii) establish suitable experiments with pulp fibres for obtaining these parameters. The model consists of an additive combination of elastic potentials for an isotropic and an anisotropic part. Viscoelasticity is implemented by a generalised Maxwell model. We suggest an incompressible treatment of the material to relate experiments and material parameters in a well-defined manner. By this means, the calibration of the parameters is performed with only two micromechanical experiments, atomic force microscopy nanoindentation on the fibre's surface and uniaxial tensile tests. We advocate this strategy for certain applications, such as in paper network simulations or fibres in a dry state, when the fibre's compressibility is of minor importance. The results of this analysis show a good performance of the proposed model applied to pulp fibres.

AB - We propose a minimum input mechanical model of pulp fibres. A pulp fibre can be idealised as a complex compound bar, microfibrils render its behaviour anisotropic. The objective of this work is twofold: (i) develop an anisotropic viscoelastic material model of a pulp fibre that shows the essential characteristics with a minimum number of material parameters and (ii) establish suitable experiments with pulp fibres for obtaining these parameters. The model consists of an additive combination of elastic potentials for an isotropic and an anisotropic part. Viscoelasticity is implemented by a generalised Maxwell model. We suggest an incompressible treatment of the material to relate experiments and material parameters in a well-defined manner. By this means, the calibration of the parameters is performed with only two micromechanical experiments, atomic force microscopy nanoindentation on the fibre's surface and uniaxial tensile tests. We advocate this strategy for certain applications, such as in paper network simulations or fibres in a dry state, when the fibre's compressibility is of minor importance. The results of this analysis show a good performance of the proposed model applied to pulp fibres.

KW - Pulp fibres

KW - Viscoelasticity

KW - Invariant-based

KW - Nanoindentation

KW - Atomic force microscopy (AFM)

KW - Transverse isotropy

KW - Micromechanical testing

KW - Atomic force microscopy

KW - Invariant-based

KW - Micromechanical testing

KW - Nanoindentation

KW - Pulp fibres

KW - Transverse isotropy

KW - Viscoelasticity

UR - http://www.scopus.com/inward/record.url?scp=85066441539&partnerID=8YFLogxK

U2 - 10.1016/j.mechmat.2019.04.012

DO - 10.1016/j.mechmat.2019.04.012

M3 - Article

VL - 135

SP - 149

EP - 161

JO - Mechanics of Materials

JF - Mechanics of Materials

SN - 0167-6636

ER -