Veröffentlichungen suchen

In allen Inhalten suchen

Filters für Veröffentlichungen

Konzepte suchen
Ausgewählte Filter

Erscheinungsjahr

  • 2020
  • 2019
  • 2017
  • 2016

Autor

  • Sergio de Traglia Amancio Filho
2020

Durability of Metal-Composite Friction Spot Joints under Environmental Conditions

Goushegir, S. M., Scharnagl, N., dos Santos, J. F. & Amancio-Filho, S. T., 4 Mär 2020, in : Materials. 13, 5, 20 S., 1144.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Mechanical integrity of friction-riveted joints for aircraft applications

Borba, N. Z., Kötter, B., Fiedler, B., dos Santos, J. F. & Amancio-Filho, S. T., 15 Jan 2020, in : Composite Structures. 232, 111542.

Publikation: Beitrag in einer FachzeitschriftArtikel

2019

Friction Riveting – Single-phase Process Variant

Pina Cipriano, G., Vilaça, P. & Amancio-Filho, S. T., 2019.

Publikation: KonferenzbeitragPoster

Quasi-static and fatigue behavior of 3D-printed polymer-metal hybrid joints by AddJoining technique

Falck, R., dos Santos, J. F. & Amancio-Filho, S. T., Mai 2019.

Publikation: KonferenzbeitragAbstract

Corrosion behavior of metal–composite hybrid joints: Influence of precipitation state and bonding zones

André, N. M., Boualib, A., Maawad, E., Staron, P., Santos, J. F. D., Zheludkevich, M. L. & Amancio-Filho, S. T., 1 Sep 2019, in : Corrosion science. 158, 108075.

Publikation: Beitrag in einer FachzeitschriftArtikel

2020

Stability of a Melt Pool during 3D-Printingof an Unsupported Steel Component and Its Influence on Roughness

Skalon, M., Meier, B., Gruberbauer, A., Amancio-Filho, S. T. & Sommitsch, C., 10 Feb 2020, in : Materials. 13, 3, 14 S., 808.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

The influence of clamping pressure on joint formation and mechanical performance of Ti6Al4V/CF-PEEK friction-riveted joints

Borba, N. Z., dos Santos, J. F. & Amancio-Filho, S. T., 1 Mär 2019, in : Materials. 12, 5, 745.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

An investigation of the Ultrasonic Joining process parameters effect on the mechanical properties of metalcomposite hybrid joints

Pina Cipriano, G. F., Blaga, L. A., dos Santos, J. F., Vilaça, P. & Amancio-Filho, S. T., 2019, IIW Bratislava - Conference Proceedings.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem Konferenzband

Open Access
Datei

Single-phase friction riveting: metallic rivet deformation, temperature evolution, and joint mechanical performance

Pina Cipriano, G., Ahiya, A., dos Santos, J. F., Vilaça, P. & Amancio-Filho, S. T., 1 Jan 2019, in : Welding in the World.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Evaluation of joint formation and mechanical performance of the AA7075-T6/CFRP spot joints produced by frictional heat

André, N. M., dos Santos, J. F. & Amancio-Filho, S. T., 1 Mär 2019, in : Materials. 16, 6, 891.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access
2020

Low-velocity impact response of friction riveted joints for aircraft application

Borba, N. Z., Körbelin, J., Fiedler, B., dos Santos, J. F. & Amancio-Filho, S. T., 15 Jan 2020, in : Materials & Design. 186, 13 S., 108369.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access
2019

Juntas híbridas de policarbonato e alumínio 6061-T6 produzidas por sobremoldagem por injeção: efeitos da texturizaçāo a laser do metal sobre a resistência interfacial

Oliveira, G. H. M., Silva, J. M. O., Simões, J. G. B., Riva, R., Amancio-Filho, S. T. & Canto, L. B., Okt 2019, Congresso Brasileiro de Polímeros : Anais do 15º Congresso Brasileiro de Polímeros/Associação Brasileira de Polímeros. S. 2929-2933

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem Konferenzband

On the damage evolution and residual strength of CFRP friction-riveted joints impacted with low-velocities

Borba, N. Z., dos Santos, J. F. & Amancio-Filho, S. T., Mai 2019.

Publikation: KonferenzbeitragAbstract

2020

Impact resistance of metal-composite hybrid joints produced by frictional heat

André, N. M., dos Santos, J. F. & Amancio-Filho, S. T., 1 Feb 2020, in : Composite Structures. 233, 111754.

Publikation: Beitrag in einer FachzeitschriftArtikel

2019

Friction riveted hybrid joints of short-glass-fiber reinforced polyamide 6 and 6056-T6 aluminum alloy

Cordeiro de Proença, B., Blaga, L. A., dos Santos, J. F., Amancio-Filho, S. T. & Canto, L. B., Okt 2019, 15° Congresso Brasileiro de Polímeros (15°CBPol). S. 340-344

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem Konferenzband

Influence of LDH Conversion Coating on the Adhesion and Corrosion Protection of Friction Spot-Joined AA2024-T3/CF-PPS

Bouali, A., André, N. M., Serdechnova, M., dos Santos, J. F., Amancio-Filho, S. T. & Zheludkevich, M. L., 27 Jun 2019.

Publikation: KonferenzbeitragAbstract

Open Access
2020

Process-Related Changes in Polyetherimide Joined by Friction-Based Injection Clinching Joining (F-ICJ)

Abibe, A. B., Sônego, M., Canto, L. B., dos Santos, J. F. & Amancio-Filho, S. T., 25 Feb 2020, in : Materials. 13, 5, 17 S., 1027.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Prediction of the mechanical and failure behavior of metal-composite hybrid joints using cohesive surfaces

Pereira Alessio, R., Manente André, N., Goushegir, S. M., dos Santos, J. F., Mazzaferro, J. A. E. & Amancio-Filho, S. T., 20 Mai 2020, in : Materials Today / Communications. 24, 9 S., 101205.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Stability of a Melt Pool during 3D-Printing of an Unsupported Steel Component and Its Influence on Roughness

Skalon, M., Meier, B., Gruberbauer, A., Amancio-Filho, S. T. & Sommitsch, C., 10 Feb 2020, in : Materials. 13, 14 S., 808.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access
Datei