Veröffentlichungen suchen

In allen Inhalten suchen

Filters für Veröffentlichungen

Konzepte suchen
Ausgewählte Filter

Erscheinungsjahr

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016

Autor

  • Sergio de Traglia Amancio Filho
2018

Improvement on fatigue performance of metal-composite friction spot joints based on the weld-bonding concept

Manente, N., Goushegir, S. M., Dos Santos, J. F., Canto, L. B. & Amancio-Filho, S. T., 8 Mai 2018, ANTEC 201, Paper Society of Plastics Engineers.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem Konferenzband

Preface

Amancio-Filho, S. T. & Blaga, L. A., 1 Jan 2018, Joining of Polymer-Metal Hybrid Structures: Principles and Applications. Wiley, S. xvii-xxi

Publikation: Beitrag in Buch/Bericht/KonferenzbandVorwort/Nachwort

Friction riveting of polymer-metal multimaterial structures

Amancio-Filho, S. T. & Blaga, L. A., 1 Jan 2018, Joining of Polymer-Metal Hybrid Structures: Principles and Applications. Wiley, S. 203-247 45 S.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/Bericht

Case studies on topology optimization for AddJoining metal-polymer hybrid structures

Falck, R., dos Santos, J. F. & Amancio-Filho, S. T., 2018, 12th International Seminar Numerical Analysis of Weldability.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem Konferenzband

Influence of the interlayer film thickness on the mechanical performance of AA2024-T3/CF-PPS hybrid joints produced by friction spot joining

André, N. M., Goushegir, S. M., dos Santos, J. F., Canto, L. B. & Amancio-Filho, S. T., 2 Jan 2018, in : Welding International. 32, 1, S. 1-10 10 S.

Publikation: Beitrag in einer FachzeitschriftArtikel

Composite surface pre-treatments: Improvement on adhesion mechanisms and mechanical performance of metal–composite friction spot joints with additional film interlayer

Manente André, N., Goushegir, S. M., Scharnagl, N., dos Santos, J. F., Canto, L. B. & Amancio-Filho, S. T., 29 Jul 2018, in : The Journal of Adhesion. 94, 9, S. 723-742 20 S.

Publikation: Beitrag in einer FachzeitschriftReview eines Fachbereichs (Review article)

AddJoining of layered CFRP-aluminum hybrid structures: process feasibility and joint properties: Abstract

Falck, R., dos Santos, J. F. & Amancio-Filho, S. T., 2018, Aeromat 18, 29th Conference and Exposition.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem Konferenzband

Direct-friction riveting of metal-cfrp overlap joints

Borba, N. Z., de Macêdo, S. C. M., dos Santos, J. F., Canto, L. B. & Amancio-Filho, S. T., 8 Mai 2018, ANTEC 2018, Paper Society of Plastics Engineers.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem Konferenzband

2019

Friction Riveting – Single-phase Process Variant

Pina Cipriano, G., Vilaça, P. & Amancio-Filho, S. T., 2019.

Publikation: KonferenzbeitragPoster

2018

Factorial design of experiments for polymer-metal joining

Blaga, L. A., Cipriano, G. P., Gonzalez, A. R. & Amancio-Filho, S. T., 1 Jan 2018, Joining of Polymer-Metal Hybrid Structures: Principles and Applications. Wiley, S. 337-364 28 S.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/Bericht

Thermomechanical degradation of polyetherimide (PEI) by friction-based joining and the effects on quasi-static mechanical strength of hybrid joints

Sônego, M., Abibe, A. B., Canevarolo Jr., S. V., Bettini, S. H. P., dos Santos, J. F., Canto, L. B. & Amancio-Filho, S. T., Feb 2018, in : International Polymer Processing.

Publikation: Beitrag in einer FachzeitschriftArtikel

2019

Quasi-static and fatigue behavior of 3D-printed polymer-metal hybrid joints by AddJoining technique

Falck, R., dos Santos, J. F. & Amancio-Filho, S. T., Mai 2019.

Publikation: KonferenzbeitragAbstract

Corrosion behavior of metal–composite hybrid joints: Influence of precipitation state and bonding zones

André, N. M., Boualib, A., Maawad, E., Staron, P., Santos, J. F. D., Zheludkevich, M. L. & Amancio-Filho, S. T., 1 Sep 2019, in : Corrosion science. 158, 108075.

Publikation: Beitrag in einer FachzeitschriftArtikel

2018

Influence of the Aluminum Pretreatment on the Mechanical Performance of Metal-Polymer Friction Spot Joints: Influence of the Aluminum Pretreatment on the Mechanical Performance of Metal-Polymer Friction Spot Joints

Goushegir, S. M., Schricker, K., Bergmann, J. P., dos Santos, J. F. & Amancio-Filho, S. T., 2018, 12th International Symposium on Friction Stir Welding, Chicoutimi, Quebec, Canada.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem Konferenzband

Friction-based joining of metal-composite multi-material structures: the future is hybrid: Abstract

Amancio-Filho, S. T., 2018, Aeromat 18, 29th Conference and Exposition.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem Konferenzband

Influence of rotational speed on the microstructure and mechanical performance of friction-riveted thermosetting composite joints

Borba, N. Z., Blaga, L., dos Santos, J. F., Canto, L. B. & Amancio-Filho, S. D. T., 2 Jan 2018, in : Welding International. 32, 1, S. 11-21 11 S.

Publikation: Beitrag in einer FachzeitschriftArtikel

2018

Modelling Material Flow in Friction Riveting of Polymeric Materials

Pina Cipriano, G., dos Santos, J. F., Vilaça, P. & Amancio-Filho, S. T., 2018.

Publikation: KonferenzbeitragPoster

2019

The influence of clamping pressure on joint formation and mechanical performance of Ti6Al4V/CF-PEEK friction-riveted joints

Borba, N. Z., dos Santos, J. F. & Amancio-Filho, S. T., 1 Mär 2019, in : Materials. 12, 5, 745.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access
2020

Durability of Metal-Composite Friction Spot Joints under Environmental Conditions

Goushegir, S. M., Scharnagl, N., dos Santos, J. F. & Amancio-Filho, S. T., 4 Mär 2020, in : Materials. 13, 5, 20 S., 1144.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Mechanical integrity of friction-riveted joints for aircraft applications

Borba, N. Z., Kötter, B., Fiedler, B., dos Santos, J. F. & Amancio-Filho, S. T., 15 Jan 2020, in : Composite Structures. 232, 111542.

Publikation: Beitrag in einer FachzeitschriftArtikel

Prediction of the mechanical and failure behavior of metal-composite hybrid joints using cohesive surfaces

Pereira Alessio, R., Manente André, N., Goushegir, S. M., dos Santos, J. F., Mazzaferro, J. A. E. & Amancio-Filho, S. T., 20 Mai 2020, in : Materials Today / Communications. 24, 9 S., 101205.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access
2018

Ultrasonic joining of lightweight alloy/fiber-reinforced polymer hybrid structures

Feistauer, E. E. & Amancio-Filho, S. T., 1 Jan 2018, Joining of Polymer-Metal Hybrid Structures: Principles and Applications. Wiley, S. 307-333 27 S.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/Bericht

2019
2018

Friction spot joining (FSpJ)

Goushegir, S. M. & Amancio-Filho, S. T., 1 Jan 2018, Joining of Polymer-Metal Hybrid Structures: Principles and Applications. Wiley, S. 61-99 39 S.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/Bericht

2019

An investigation of the Ultrasonic Joining process parameters effect on the mechanical properties of metalcomposite hybrid joints

Pina Cipriano, G. F., Blaga, L. A., dos Santos, J. F., Vilaça, P. & Amancio-Filho, S. T., 2019, IIW Bratislava - Conference Proceedings.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem Konferenzband

2018

EP 2 990 178 Bl - A method for joining a plastic workpiece to a further workpiece: European Patent Office

Abibe, A. B., Amancio-Filho, S. T., Sônego, M. & dos Santos, J. F., Dez 2018

Publikation: SchutzrechtPatent

2019
Open Access
Datei

Single-phase friction riveting: metallic rivet deformation, temperature evolution, and joint mechanical performance

Pina Cipriano, G., Ahiya, A., dos Santos, J. F., Vilaça, P. & Amancio-Filho, S. T., 1 Jan 2019, in : Welding in the World.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Evaluation of joint formation and mechanical performance of the AA7075-T6/CFRP spot joints produced by frictional heat

André, N. M., dos Santos, J. F. & Amancio-Filho, S. T., 1 Mär 2019, in : Materials. 16, 6, 891.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access
2019

Juntas híbridas de policarbonato e alumínio 6061-T6 produzidas por sobremoldagem por injeção: efeitos da texturizaçāo a laser do metal sobre a resistência interfacial

Oliveira, G. H. M., Silva, J. M. O., Simões, J. G. B., Riva, R., Amancio-Filho, S. T. & Canto, L. B., Okt 2019, Congresso Brasileiro de Polímeros : Anais do 15º Congresso Brasileiro de Polímeros/Associação Brasileira de Polímeros. S. 2929-2933

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem Konferenzband

2018

AddJoining: A novel additive manufacturing approach for layered metal-polymer hybrid structures

Falck, R., Goushegir, S. M., dos Santos, J. F. & Amancio-Filho, S. T., 15 Apr 2018, in : Materials Letters. 217, S. 211-214 4 S.

Publikation: Beitrag in einer FachzeitschriftArtikel

Preface (Editorial)

Amancio-Filho, S. T. & Blaga, L. A., 27 Feb 2018, Joining of Polymer-Metal Hybrid Structures: Principles and Applications. Wiley, S. xvii-xxi

Publikation: Beitrag in Buch/Bericht/KonferenzbandVorwort/Nachwort

2019

On the damage evolution and residual strength of CFRP friction-riveted joints impacted with low-velocities

Borba, N. Z., dos Santos, J. F. & Amancio-Filho, S. T., Mai 2019.

Publikation: KonferenzbeitragAbstract

2020

Impact resistance of metal-composite hybrid joints produced by frictional heat

André, N. M., dos Santos, J. F. & Amancio-Filho, S. T., 1 Feb 2020, in : Composite Structures. 233, 111754.

Publikation: Beitrag in einer FachzeitschriftArtikel

Low-velocity impact response of friction riveted joints for aircraft application

Borba, N. Z., Körbelin, J., Fiedler, B., dos Santos, J. F. & Amancio-Filho, S. T., 15 Jan 2020, in : Materials & Design. 186, 13 S., 108369.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access
2018

A Review on Direct Assembly of Through-the-Thickness Reinforced Metal–Polymer Composite Hybrid Structures

Feistauer, E. E., dos Santos, J. F. & Amancio-Filho, S. T., 22 Dez 2018, in : Polymer Engineering and Science.

Publikation: Beitrag in einer FachzeitschriftArtikel

Staking of polymer-metal hybrid structures

Abibe, A. B. & Amancio-Filho, S. T., 1 Jan 2018, Joining of Polymer-Metal Hybrid Structures: Principles and Applications. Wiley, S. 249-274 26 S.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/Bericht

Fundamentals of Force-Controlled Friction Riveting: Part II - Joint Global Mechanical Performance and Energy Efficiency

Pina Cipriano, G. F., Blaga, L. A., dos Santos, J. F., Vilaça, P. & T. Amancio-Filho, S., 2018, in : Materials. 11, 12, 2489.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access
2019

Influence of LDH Conversion Coating on the Adhesion and Corrosion Protection of Friction Spot-Joined AA2024-T3/CF-PPS

Bouali, A., André, N. M., Serdechnova, M., dos Santos, J. F., Amancio-Filho, S. T. & Zheludkevich, M. L., 27 Jun 2019.

Publikation: KonferenzbeitragAbstract

Open Access
2018

Taguchi design and response surface methodology for polymer-metal joining

Blaga, L. A., Cipriano, G. P., Gonzalez, A. R. & Amancio-Filho, S. T., 1 Jan 2018, Joining of Polymer-Metal Hybrid Structures: Principles and Applications. Wiley, S. 365-388 24 S.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/Bericht

Fundamentals of Force-Controlled Friction Riveting: Part 1 - Joint Formation and Heat Development

Pina Cipriano, G. F., Blaga, L. A., dos Santos, J. F., Vilaça, P. & T. Amancio-Filho, S., Nov 2018, in : Materials. 11, 11, 22 S., 2294.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Friction riveted hybrid joints of short-glass-fiber reinforced polyamide 6 and 6056-T6 aluminum alloy

Cordeiro de Proença, B., Blaga, L. A., dos Santos, J. F., Amancio-Filho, S. T. & Canto, L. B., Okt 2019, 15° Congresso Brasileiro de Polímeros (15°CBPol). S. 340-344

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem Konferenzband