3D-Printed 140 GHz Beam-Scanning Antenna Using Partially Reflecting Surface

Rui Xu; Steven Gao; Benito Sanz-Izquierdo; Patrick Reynaert; Alexander  Standaert; Gregory Gibbons; Wolfgang Bösch; Michael Ernst Gadringer

doi:10.1109/ICCEM47450.2020.9219334

3D-Printed 140 GHz Beam-Scanning Antenna Using Partially Reflecting Surface

Rui Xu, Steven Gao, Benito Sanz-Izquierdo, Patrick Reynaert, Alexander Standaert, Gregory Gibbons, Wolfgang Bösch, Michael Ernst Gadringer

Institut für Hochfrequenztechnik (4510)

Publikation: Konferenzbeitrag › Paper › Begutachtung

Abstract

This paper presents a low-cost and high-gain beam-scanning antenna around 140.0 GHz with partially reflecting surface (PRS). The PRS is composed by two layers of metal grids and exhibits a positive reflection phase gradient over frequency. The phase difference could be achieved by the thickness of PRS layer. To validate this design and meet the low-cost requirements, this antenna will be printed by additive manufacturing (AM) technology.

Originalsprache	englisch
Seiten	289-290
Seitenumfang	2
DOIs	https://doi.org/10.1109/ICCEM47450.2020.9219334
Publikationsstatus	Veröffentlicht - 24 Aug. 2020
Veranstaltung	2020 IEEE International Conference on Computational Electromagnetics : ICCEM 2020 - Virtuell, Singapur Dauer: 24 Aug. 2020 → 26 Aug. 2020 http://iccem2020.org/

Konferenz

Konferenz	2020 IEEE International Conference on Computational Electromagnetics
Kurztitel	ICCEM 2020
Land/Gebiet	Singapur
Ort	Virtuell
Zeitraum	24/08/20 → 26/08/20
Internetadresse	http://iccem2020.org/

Schlagwörter

Additive manufacturing
Partially reflective surface

ASJC Scopus subject areas

Ingenieurwesen (sonstige)
Computational Mathematics
Strahlung
Mathematische Physik
Modellierung und Simulation

Fields of Expertise

Information, Communication & Computing

Treatment code (Nähere Zuordnung)

Experimental

Zugriff auf Dokument

10.1109/ICCEM47450.2020.9219334Lizenz: Andere

Andere Dateien und Links

http://www.scopus.com/inward/record.url?scp=85095605911&partnerID=8YFLogxK

1 Abgeschlossen

FWF - WISDOM - Aktive und passive integrierte Antennen für THz Kommunikationssysteme
Bösch, W., Gadringer, M. E. & Köhler, J.
1/01/17 → 31/12/19
Projekt: Forschungsprojekt

Dieses zitieren

@conference{29cb9f99b3c645a8ba583b1f441b244c,

title = "3D-Printed 140 GHz Beam-Scanning Antenna Using Partially Reflecting Surface",

abstract = "This paper presents a low-cost and high-gain beam-scanning antenna around 140.0 GHz with partially reflecting surface (PRS). The PRS is composed by two layers of metal grids and exhibits a positive reflection phase gradient over frequency. The phase difference could be achieved by the thickness of PRS layer. To validate this design and meet the low-cost requirements, this antenna will be printed by additive manufacturing (AM) technology.",

keywords = "Additive manufacturing, Partially reflective surface, Additive manufacturing, Beam-scanning, Partially reflective surface",

author = "Rui Xu and Steven Gao and Benito Sanz-Izquierdo and Patrick Reynaert and Alexander Standaert and Gregory Gibbons and Wolfgang B{\"o}sch and Gadringer, {Michael Ernst}",

year = "2020",

month = aug,

day = "24",

doi = "10.1109/ICCEM47450.2020.9219334",

language = "English",

pages = "289--290",

note = "2020 IEEE International Conference on Computational Electromagnetics : ICCEM 2020, ICCEM 2020 ; Conference date: 24-08-2020 Through 26-08-2020",

url = "http://iccem2020.org/",

}

TY - CONF

T1 - 3D-Printed 140 GHz Beam-Scanning Antenna Using Partially Reflecting Surface

AU - Xu, Rui

AU - Gao, Steven

AU - Sanz-Izquierdo, Benito

AU - Reynaert, Patrick

AU - Standaert, Alexander

AU - Gibbons, Gregory

AU - Bösch, Wolfgang

AU - Gadringer, Michael Ernst

PY - 2020/8/24

Y1 - 2020/8/24

N2 - This paper presents a low-cost and high-gain beam-scanning antenna around 140.0 GHz with partially reflecting surface (PRS). The PRS is composed by two layers of metal grids and exhibits a positive reflection phase gradient over frequency. The phase difference could be achieved by the thickness of PRS layer. To validate this design and meet the low-cost requirements, this antenna will be printed by additive manufacturing (AM) technology.

AB - This paper presents a low-cost and high-gain beam-scanning antenna around 140.0 GHz with partially reflecting surface (PRS). The PRS is composed by two layers of metal grids and exhibits a positive reflection phase gradient over frequency. The phase difference could be achieved by the thickness of PRS layer. To validate this design and meet the low-cost requirements, this antenna will be printed by additive manufacturing (AM) technology.

KW - Additive manufacturing

KW - Partially reflective surface

KW - Additive manufacturing

KW - Beam-scanning

KW - Partially reflective surface

UR - http://www.scopus.com/inward/record.url?scp=85095605911&partnerID=8YFLogxK

U2 - 10.1109/ICCEM47450.2020.9219334

DO - 10.1109/ICCEM47450.2020.9219334

M3 - Paper

SP - 289

EP - 290

T2 - 2020 IEEE International Conference on Computational Electromagnetics

Y2 - 24 August 2020 through 26 August 2020

ER -

3D-Printed 140 GHz Beam-Scanning Antenna Using Partially Reflecting Surface

Abstract

Konferenz

Schlagwörter

ASJC Scopus subject areas

Fields of Expertise

Treatment code (Nähere Zuordnung)

Zugriff auf Dokument

Andere Dateien und Links

Fingerprint

Projekte

FWF - WISDOM - Aktive und passive integrierte Antennen für THz Kommunikationssysteme

Dieses zitieren