1-d simulation Model of a progressive Flow control for hydrostatic bearings

Jörg Edler, Darko Lovrec

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Abstract

Hydrostatic bearings in machine tools are used for qualitative highest demands. On the one hand, they are used in precision machines, for example, in grinding machines, to get high precision and the highest quality in the production. On the other hand, they are used in machines with high forces during the production process. Generally hydrostatic bearings are characterised by a good damping behaviour and good stiffness of the bearing, as well as wear resistance and nearly no friction in the bearing (fluid friction), thus, no loss of accuracy over the entire lifetime of the machine tool. A progressive flow control is needed in the bearing to get a nearly constant gap in the hydrostatic bearing, which is independent of the load on the bearing. In our case the progressive flow control works with a piston in combination with a control edge and a mechanical spring. The shape of the control edge is essential to get a nearly constant gap in the hydrostatic bearing. Therefore, a 1-D simulation model of the progressive flow control was developed and implemented in an existing 1-D simulation model of hydrostatic bearings to predict the behaviour of the hydrostatic bearing, for example, in machine tools
Originalspracheenglisch
Seiten (von - bis)267-278
Seitenumfang12
FachzeitschriftInternational Journal of Simulation Modelling
Jahrgang18
Ausgabenummer2
DOIs
PublikationsstatusVeröffentlicht - 2019

Fingerprint

Hydrostatic bearings
Hydrostatics
Bearings (structural)
Flow Control
Flow control
Simulation Model
Machine tools
Machine Tool
Friction
Grinding machines
Pistons
Wear resistance
Damping
Stiffness
Grinding
Fluids
Lifetime
Entire

Dies zitieren

1-d simulation Model of a progressive Flow control for hydrostatic bearings. / Edler, Jörg; Lovrec, Darko.

in: International Journal of Simulation Modelling, Jahrgang 18, Nr. 2, 2019, S. 267-278.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

@article{d5e5ba66b53c48b2a2ff953eedbce207,
title = "1-d simulation Model of a progressive Flow control for hydrostatic bearings",
abstract = "Hydrostatic bearings in machine tools are used for qualitative highest demands. On the one hand, they are used in precision machines, for example, in grinding machines, to get high precision and the highest quality in the production. On the other hand, they are used in machines with high forces during the production process. Generally hydrostatic bearings are characterised by a good damping behaviour and good stiffness of the bearing, as well as wear resistance and nearly no friction in the bearing (fluid friction), thus, no loss of accuracy over the entire lifetime of the machine tool. A progressive flow control is needed in the bearing to get a nearly constant gap in the hydrostatic bearing, which is independent of the load on the bearing. In our case the progressive flow control works with a piston in combination with a control edge and a mechanical spring. The shape of the control edge is essential to get a nearly constant gap in the hydrostatic bearing. Therefore, a 1-D simulation model of the progressive flow control was developed and implemented in an existing 1-D simulation model of hydrostatic bearings to predict the behaviour of the hydrostatic bearing, for example, in machine tools",
author = "J{\"o}rg Edler and Darko Lovrec",
year = "2019",
doi = "10.2507/IJSIMM18(2)472",
language = "English",
volume = "18",
pages = "267--278",
journal = "International Journal of Simulation Modelling",
issn = "1726-4529",
publisher = "DAAAM International Vienna",
number = "2",

}

TY - JOUR

T1 - 1-d simulation Model of a progressive Flow control for hydrostatic bearings

AU - Edler, Jörg

AU - Lovrec, Darko

PY - 2019

Y1 - 2019

N2 - Hydrostatic bearings in machine tools are used for qualitative highest demands. On the one hand, they are used in precision machines, for example, in grinding machines, to get high precision and the highest quality in the production. On the other hand, they are used in machines with high forces during the production process. Generally hydrostatic bearings are characterised by a good damping behaviour and good stiffness of the bearing, as well as wear resistance and nearly no friction in the bearing (fluid friction), thus, no loss of accuracy over the entire lifetime of the machine tool. A progressive flow control is needed in the bearing to get a nearly constant gap in the hydrostatic bearing, which is independent of the load on the bearing. In our case the progressive flow control works with a piston in combination with a control edge and a mechanical spring. The shape of the control edge is essential to get a nearly constant gap in the hydrostatic bearing. Therefore, a 1-D simulation model of the progressive flow control was developed and implemented in an existing 1-D simulation model of hydrostatic bearings to predict the behaviour of the hydrostatic bearing, for example, in machine tools

AB - Hydrostatic bearings in machine tools are used for qualitative highest demands. On the one hand, they are used in precision machines, for example, in grinding machines, to get high precision and the highest quality in the production. On the other hand, they are used in machines with high forces during the production process. Generally hydrostatic bearings are characterised by a good damping behaviour and good stiffness of the bearing, as well as wear resistance and nearly no friction in the bearing (fluid friction), thus, no loss of accuracy over the entire lifetime of the machine tool. A progressive flow control is needed in the bearing to get a nearly constant gap in the hydrostatic bearing, which is independent of the load on the bearing. In our case the progressive flow control works with a piston in combination with a control edge and a mechanical spring. The shape of the control edge is essential to get a nearly constant gap in the hydrostatic bearing. Therefore, a 1-D simulation model of the progressive flow control was developed and implemented in an existing 1-D simulation model of hydrostatic bearings to predict the behaviour of the hydrostatic bearing, for example, in machine tools

U2 - 10.2507/IJSIMM18(2)472

DO - 10.2507/IJSIMM18(2)472

M3 - Article

VL - 18

SP - 267

EP - 278

JO - International Journal of Simulation Modelling

JF - International Journal of Simulation Modelling

SN - 1726-4529

IS - 2

ER -