Institut für Werkstoffkunde, Fügetechnik und Umformtechnik (3030)

  • 8010

    Kopernikusgasse 24 Graz

    Österreich

Publikationen

Filter
Artikel
2020

Analysis of Splitting and Martensitic Transformation of AlNi Intermetallic Obtained by Transient Liquid Phase Bonding

Poliserpi, M., Buzolin, R., Boeri, R., Poletti, C. & Sommadossi, S., 1 Jan 2020, in : Metallurgical and Materials Transactions / B. 51, S. 916–924

Publikation: Beitrag in einer FachzeitschriftArtikel

An investigation on micro-hardness, micro-structure and ductility of clad layer in copper clad aluminum wire under multi stage-NCWD

Sichani, F. F., Rahnama, S., Raghebi, M. & Sommitsch, C., 4 Mai 2020, in : Materials Research Express. 7, 5, 056501.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access
Open Access
Open Access

Durability of Metal-Composite Friction Spot Joints under Environmental Conditions

Goushegir, S. M., Scharnagl, N., dos Santos, J. F. & Amancio-Filho, S. T., 4 Mär 2020, in : Materials. 13, 5, 20 S., 1144.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Effect of processing conditions on the structural properties and corrosion behavior of TiO2-SiO2 multilayer coatings derived via the sol-gel method

Khosravi H, S., Veerapandiyan, V. K., Vallant, R. & Reichmann, K., 1 Aug 2020, in : Ceramics International. 46, 11, S. 17741-17751 11 S.

Publikation: Beitrag in einer FachzeitschriftArtikel

Effect of Strain Rate on the Hot Ductility Behaviorof a Continuously Cast Ti–Nb Microalloyed Steel

Melo Gontijo, M., Hoflehner, C., Estermann, P., Ilie, S., Six, J. & Sommitsch, C., 10 Jul 2020, in : Steel Research International. 2020, 10 S.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Electron Beam Structuring of Ti6Al4V: New Insights on the Metal Surface Properties Influencing the Bacterial Adhesion

Ferraris, S., Warchomicka, F., Iranshahi, F., Lia, R., Cochis, A. & Spriano, S., 15 Jan 2020, in : Materials. 13, 2, 11 S., 409.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Impact resistance of metal-composite hybrid joints produced by frictional heat

André, N. M., dos Santos, J. F. & Amancio-Filho, S. T., 1 Feb 2020, in : Composite Structures. 233, 111754.

Publikation: Beitrag in einer FachzeitschriftArtikel

In Situ Analysis of the Phase Transformation Kinetics in the β-Water-Quenched Ti-5Al-5Mo-5V-3Cr-1Zr Alloy during Ageing after Fast Heating

Paiotti Marcondes Guimaraes, R., Callegari, B., Warchomicka, F. G., Aristizabal, K., Soldera, F., Mücklich, F. & Pinto, H. C., 21 Feb 2020, in : Quantum Beam Science. 4, 1, S. 1-16 16 S., 12.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Low cycle fatigue behavior of AZ31B extrusion at elevated temperatures

Jabbari, A. H., Sedighi, M., Jahed, H. & Sommitsch, C., 2020, in : International Journal of Fatigue. 139, 105803.

Publikation: Beitrag in einer FachzeitschriftArtikel

Low cycle fatigue behavior of magnesium matrix nanocomposite at ambient and elevated temperatures

Jabbari, A. H., Shafiee Sabet, A., Sedighi, M., Jahed, H. & Sommitsch, C., 2020, in : Materials Science and Engineering / A. 793, 13 S., 139890.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Low-velocity impact response of friction riveted joints for aircraft application

Borba, N. Z., Körbelin, J., Fiedler, B., dos Santos, J. F. & Amancio-Filho, S. T., 15 Jan 2020, in : Materials & Design. 186, 13 S., 108369.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Mechanical integrity of friction-riveted joints for aircraft applications

Borba, N. Z., Kötter, B., Fiedler, B., dos Santos, J. F. & Amancio-Filho, S. T., 15 Jan 2020, in : Composite Structures. 232, 111542.

Publikation: Beitrag in einer FachzeitschriftArtikel

Mechanical properties and fracture modes of thin butt-joined aluminum-steel blanks for automotive applications

Silvayeh, Z., Domitner, J., Sommitsch, C., Hartmann, M., Karner, W. & Götzinger, B., 2020, in : Journal of Manufacturing Processes. 59, S. 456-467

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Microstructure investigation of duplex stainless steel welds using arc heat treatment technique

Putz, A., Hosseini, V. A., Westin, E. M. & Enzinger, N., 1 Jul 2020, in : Welding in the World. 64, 7, S. 1135-1147 13 S.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Modeling the Failure Behavior of Self-Piercing Riveting Joints of 6xxx Aluminum Alloy

Hönsch, F., Domitner, J., Sommitsch, C. & Götzinger, B., 2020, in : Journal of Materials Engineering and Performance. 29, S. 4888–4897

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Modelling the Competitive Growth of Primary, Allotriomorphic, and Secondary Alpha in Ti-6Al-4V

Buzolin, R. H., Weiß, D., Krumphals, A., Lasnik, M. & Poletti, M. C., 1 Aug 2020, in : Metallurgical and Materials Transactions / A . 51, 8, S. 3967-3980 14 S.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Prediction of the mechanical and failure behavior of metal-composite hybrid joints using cohesive surfaces

Pereira Alessio, R., Manente André, N., Goushegir, S. M., dos Santos, J. F., Mazzaferro, J. A. E. & Amancio-Filho, S. T., Sep 2020, in : Materials Today / Communications. 24, 9 S., 101205.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Process-Related Changes in Polyetherimide Joined by Friction-Based Injection Clinching Joining (F-ICJ)

Abibe, A. B., Sônego, M., Canto, L. B., dos Santos, J. F. & Amancio-Filho, S. T., 25 Feb 2020, in : Materials. 13, 5, 17 S., 1027.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Sechs Monate in Schweden ... ein Kurzbericht

Enzinger, N., Jul 2020, Schweiss- & Prüftechnik, 07/08, S. 122-123 2 S.

Publikation: Beitrag in Zeitung/MagazinArtikel

Similar and dissimilar welds of ultrafine grained aluminium obtained by friction stir welding

Orłowska, M., Brynk, T., Hütter, A., Goliński, J., Enzinger, N., Olejnik, L. & Lewandowska, M., 10 Mär 2020, in : Materials Science and Engineering / A. 777, 15 S., 139076.

Publikation: Beitrag in einer FachzeitschriftArtikel

Stability of a Melt Pool during 3D-Printing of an Unsupported Steel Component and Its Influence on Roughness

Skalon, M., Meier, B., Gruberbauer, A., Amancio-Filho, S. T. & Sommitsch, C., 1 Feb 2020, in : Materials. 13, 3, 14 S., 808.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access
Datei

Thermal fatigue testing of laser powder bed fusion (L-PBF) processed AlSi7Mg alloy in presence of a quasi-static tensile load

Sajedi, Z., Casati, R., Poletti, M. C., Skalon, M. & Vedani, M., 3 Jul 2020, in : Materials Science and Engineering / A. 789, 139617.

Publikation: Beitrag in einer FachzeitschriftArtikel

Thixomolded AZ91D and MRI153M magnesium alloys and their enhanced corrosion resistance

Buzolin, R. H., Volovitch, P., Maltseva, A., Lamaka, S., Blawert, C., Mendis, C. L., Lohmüller, A., Kainer, K. U. & Hort, N., 12 Jan 2020, in : Materials and corrosion. 71, 3, S. 339-351 13 S.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access

Wire-Based Additive Manufacturing of Ti-6Al-4V Using Electron Beam Technique

Pixner, F., Warchomicka, F. G., Peter, P. R., Steuwer, A., Hörnqvist Colliander, M., Pederson, R. & Enzinger, N., Aug 2020, in : Materials. 13, 15, 3310.

Publikation: Beitrag in einer FachzeitschriftArtikel

Open Access
2021

In situ assessment of isochronal phase transformations in a lamellar Ti–5Al–5Mo-5V–3Cr–1Zr alloy using synchrotron X-ray diffraction

Callegari, B., Campo, L., Aristizabal, K., Guitar, M. A., Warchomicka, F. G., Coelho, R. S., Brito, P. P., Soldera, F., Mücklich, F. & Cavalcanti Pinto, H., 5 Feb 2021, in : Journal of Alloys and Compounds. 853, 157105.

Publikation: Beitrag in einer FachzeitschriftArtikel

Refinement of the Ti-17 microstructure after hot deformation: Coupled mesoscale model

Buzolin, R. H., Canelo Yubero, D., Warchomicka, F. G., Lasnik, M., Krumphals, A. & Poletti, M. C., 7 Jan 2021, in : Materials Science and Engineering / A. 800, 19 S., 140268.

Publikation: Beitrag in einer FachzeitschriftArtikel